Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Mapeflex 310ml PU45 Sealant White Poly Seal & Adhesive

Status : In stock

Delivery : Standard help

SKU : L016192
Inc VAT: £10.20

Quick Overview

Mapei Mapeflex PU45 is a rapid hardening, thixotropic, polyurethane, single component sealant and adhesive. Suitable for internal and external applications offering a flexible bond between all types of construction material.

For assistance, please call:

020 8362 8100

Mapeflex 310ml PU45 Sealant White Poly Seal & Adhesive
Move your mouse over image or click to enlarge
360 Mapeflex 310ml PU45 Sealant White Poly Seal & Adhesive
Mapeflex PU45 is a single component, thixotropic, rapid hardening, polyurethane sealant and adhesive with a high modulus of elasticity. For sealing expansion and distribution joints in concrete walls and floors subject to movement up to 20% in internal or external car-parks, supermarkets, shopping centers and warehouses. May also be used as an adhesive for bonding stone and brickwork, metal such as flashing and guttering, wooden and plastic baseboards, cable beads and decorative gypsum elements.

Key Features
  • Internal and external use
  • Flexible bond between all types of construction materials
  • Primer not normally required
  • Available in 3 colours
  • Very easy to apply

Surface Preparation
All surfaces to be sealed or bonded must be dry, sound and free from dust, crumbling parts, oil, grease, wax and old paint. When used for sealing Mapeflex PU45 must only bond perfectly to the sides, not the bottom, see technical data sheet to prevent this. Mapeflex PU45 withstands movement when in servive of up to 20% of the average width of the sealed joint. Use masking tape along the edges of the joint to provide an attractive finish. This must be removed immediately after smoothing the sealant.

Recommended Systems
When used as a sealant - Place a cartridge in the special extrusion gun, make a hole in the tip of the cartridge, screw on the extrusion nozzle, cut the nozzle at a 45° angle dependent on the width required. Squeeze out the product in a continuous flow into the joint, avoid trapping air. Immediately after extruding the product, smooth over the surface with suitable sized and shaped tool while keeping it continuously wet with soap and water. When used as a flexible adhesive - When bonding sections with a restricted surface area, extrude single drops of the product on the back of the section and press it down well on to the substrate to spread the adhesive uniformly. When bonding sections with a large surface area, extract a series of vertical, parallel beads approx. 150mm apart and press on well to spread the adhesive uniformly. If required, the bonded element may be adjusted within 30 minutes of application at a temperature of +23°C. When bonding heavy loads or in critical conditions, extra support such as clamps or props may be necessary for the first 24 hours at +23°C. Do not bond with layers of product more than 3mm thick.

3.0 meters per 300ml cartridge

Technical Characteristics
Mapeflex PU45 is a single component, thixotropic, easy-to-apply polyurethane-based sealant and adhesive with a high modulus of elasticity and meets the requirements of ISO 11600 class F20 HM. Solvent-free, odorless with a low impact on the environment, Mapeflex PU45 is certified as EC1 R by the GEV institute as having extremely low emission levels of volatile organic compounds. Mapeflex PU45 hardens following its reaction with atmospheric humidity and its special characteristics offers a guarantee of long service life. It may be used on horizontal and vertical surfaces. The product is ready to use and available in metal cartridges. The consistency of the product is ideal for quick application and its rapid-hardening characteristics (approx. 3 mm every 24 hours) allows the surface to be put into service quickly with resulting economic advantages. Mapeflex PU45 can be over-painted once cured with elastomeric paints.
Unit Of Sale Each
Colour White
Size 310ml
Barcode 8022452052767
EDP code 195943
Brand Mapei

Product Attachments

View FileMapeflex PU45 Sealant    Size: (521.04 KB) Technical Data Sheet
View FileMapeflex PU45 Sealant    Size: (119.17 KB) Safety Data Sheet

You must be logged in to post a question.

No comments just yet - be the first!

There are no products matching the selection.

Post your comment

Builder Depot