The Sika Stixall Extreme Power 290ml is a one-part adhesive with sealant properties. It bonds a vast range of building materials and can be applied both internally and externally. Featuring a combination of silicone and polyurethane technologies, this solvent-free adhesive and sealant offers outstanding strength and waterproof protection.

Key Features

• Works effectively on wet surfaces and cures to a water and weatherproof finish
• Suitable for use on metal, wood, plastic, glass, polyester, plaster and concrete
• Formulated for both sealing and bonding applications inside or outdoors
• Solvent-free formula with no odour, suitable for use in confined spaces
• Can be overpainted with water-based paints once fully cured
• Intended for both adhesive and sealant use on interiors
• Excellent performance on windows, doors and mirrors
• Intended for adhesive use on exteriors
• Offers excellent initial grab

Technical Information

• Thermal resistance: -40°C to +100°C
• Coverage: 10m (using 6mm beads)
• Curing time for 1mm: 24 hours
• Density: 1.5g per cm
• Shelf life: 12 months
• Chemical base: STP
• Volume: 290ml

Application Instructions

1. Cut the cartridge tip, fix the nozzle and cut to the desired bead size before applying with a sealant gun
2. For plasterboard, wall panels and worktops: Apply adhesive around the edges (30-50mm from edge). Cover the rear with beads of adhesive at 300mm intervals and press into place
3. For decorative mouldings: Apply adhesive to the rear of the object in one or two continuous beads and press immediately into place. Fill any gaps with thicker beads of adhesive
4. For use as a sealant: Use masking tape to protect the surfaces. Tool the joint within 5 minutes of applying the sealant
5. Clean excess material with a damp cloth or white spirit before it cures

Approvals

• EN15651-1:2012 F-INT
• ISO7390

Product Disclaimer

• Please note that this product is only compatible with the ProDec Advance Revolving Caulking Gun and the ProDec Extra Strong Skeleton Caulking Gun
• May stain and discolour reconstituted or natural stone like granite, marble and limestone
• In areas of high UV, some darkening or discolouration of the product may occur
• Not suitable for use in permanently submerged areas or aquariums
• Do not use on bitumen, asphalt, or surfaces that bleed plasticisers
• Certified as a sealant for internal use only
• Do not overpaint before full cure