75mm x 150mm Speed Pro Masonry Joist Hanger Galvanised

In stock
SKU
H003030
£3.05 Ex VAT

Need More, Save More

  • Up to 24£3.05Ex VAT
  • 25 & Over £2.19 Ex VAT

Speed Pro masonry joist hanger is a non-welded joist hanger for supporting timber joists, beams and trussed rafters from masonry walls.

57 In Stock

Product Information

Speed Pro Masonry Joist Hanger has remarkable strength without the need for a wide top flange. With no welds the Speed Pro Masonry Hanger is the only single piece masonry joist hanger with a straight top flange. It also has the key advantage that any standard Speed Pro Masonry hanger can be transformed into a hook over from stock. No special tools or rivets required. Just inset the Lock Plate at 90 degrees, rotate and tap into place. The Speed Pro Masonry Joist Hanger is a 2.4mm thick Welded Masonry Joist Hanger for building into walls with a minimum crushing strength of 3.5N/mm2. Hangers can also be fixed to steel beams using appropriate fixings.


Key Features:

  • All hangers 150mm deep and over are made 10mm less to ensure joist levels are maintained
  • Minimum block strength 3.5N/mm2
  • Mean Deflection of 1.47mm @ 1/3 of declared value
  • Loads are based on tests conducted by Ceram Building Technology and are determined in accordance with BSEN845
  • Loads are calculated without the Lock Plate
  • 2.4mm Hot dip galvanized coil to S390GD+Z MA, EN 10346:2009 600 g/m2 not oiled, Chemically passivated (Cr- free)
  • Product: Single piece masonry hanger
  • Characteristic value for Eurocode 5: 10.85kN
  • Safe working load for BS5268: 5.42kN long term

Application
The back plate of the hanger should lie flat against the vertical masonry support. The masonry flange should have a minimum of 3 courses (675mm masonry) above and both supporting and above masonry should be allowed to mature before any load is applied. Joist should be square cut and sit tight to the back of the hanger- the maximum gap permitted is 6mm. Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent and use Heavy Duty Restraint Straps to provide lateral Restraint. The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.

Product Specifications

Technical Specification
Brand: Speed Pro
MPN: WM75x150
Pack Size: 1
Width: 75mm
Length: 150mm
Thickness: 2.4mm
Material: Galvanised
Weight: 0.6kg

  • This product is dispatched from our warehouse and is available for in-store purchase.
  • This product will usually be delivered via UPS.
  • Orders received by 12:00pm are processed the same working day.
  • Your delivery charge will be displayed in the trolley page and checkout prior to purchase.
  • Once the order has been dispatched you will be sent relevant tracking information.
  • This item is eligible for returns as per our Returns Policy.
  • If you are not in to receive your delivery the parcel will be taken to your local access point.

View the trust certificate
  • For further information on the nature of the review controls, as well as the possibility of contacting the author of the review please consult our  GCU.
  • No inducements have been provided for these reviews.
  • Reviews are published and kept for a period of five years .
  • Reviews can not be modified: If a customer wishes to modify their review then they can do so by contacting Verified Reviews directly to remove the existing review and publish an amended one .
  • The reasons for deletion of reviews are available here.

5 /5

Based on 1 customer(s) reviews

  • 1
    0
  • 2
    0
  • 3
    0
  • 4
    0
  • 5
    1

Anonymous customer   published 01/11/2018 following an order made on 26/10/2018

5/5

Excellent joist hanger

×