The Timbabuild Timba Glaze Glazing Sealant White 290ml is a single component hybrid polymer. This product has been specifically designed for bedding in any type of indoor or outdoor glazing unit. This sealant has an extremely strong initial bond and provides fantastic resistance to UV and weather.

Key Features:

• Compatible with Butyl tapes in double glazed units
• Maintains a strong elastic bond without shrinkage
• Can be painted and stained for a complete finish
• Offers a high bonding strength and durability
• Suitable for new or repaired glazing units
• Can be applied to wet or damp surfaces
• Provides UV and weather resistance

Technical Information

• Temperature resistance: -40 to 80°C
• Skin over time: 20 minutes
• Overpaint time: 1 hour
• Service life: 10 years
• Cure rate: 24 hours
• Shelf life: 1 year
• VOC level: A+

Application Instructions

1. Ensure surfaces are clean and free of debris, dirt and oil
2. Remove any old putty that remains on the surface
3. Sand the surface to prepare it for sealing
4. Apply a primer before the sealant for best results
5. Cut off the threaded end of the cartridge and screw on the nozzle
6. Insert the cartridge into an applicator gun and press the trigger until the sealant is visible
7. Remove any masking tape if used and apply paint after an hour

Approvals

• ISO 14001
• ISO 9001

Product Disclaimer

• Please note that this product is only compatible with the ProDec Advance Revolving Caulking Gun and the ProDec Extra Strong Skeleton Caulking Gun