SKU
H006278
Click & Collect
£16.74
Inc VAT
£22.32 Per L
- Elevate Contact Bonding Adhesive Spray 750ml
- Specifically designed for bonding RubberCover EPDM membranes to insulations
- Easily applied to wood, masonry, metal and other substrates
- Quicker drying time and useable in large range of temperatures
- Toluene and DCM free
Product Information
Elevate’s RubberCover Bonding Adhesive Spray (750 ml) is specially designed for maximum adhesion when bonding EPDM membranes to approved substrates and insulation. With a guaranteed fast drying time and the ease of having your product in a can. This spray is matched to RubberCover membranes for best use in small residential flat roof projects and renovations.
Key Features
- Solvent based contact bonding adhesive aerosol spray (750ml)
- Versatile use on a number of appropriate substrates
- Fantastic resistance to ageing
- Between 1.2-1.5m ² of surface coverage (two sided application)
- Easy application with aerosol can
Technical Information
- Base: Blend of Synthetic rubber
- Contained solvents: Acetone, Butanone, n-Hexane
- Hazardous: Flammable
- Solids: 39 ± 1%
- Flashpoint: -35 °C
- Colour: Green
- Shelf life 12 months (if storage conditions are met)
Application Instructions
- Ensure surfaces are clean, dry and free of foreign materials before mating
- Remove any moisture or contaminants from surface before application
- Avoid contact with mineral and vegetable oils, grease and petroleum based products
- If adhesive has been exposed to temperatures lower than 10 °C or above 25°C for prolonged period, restore adhesive to room temperature (between 10-25 °C) before use
- Aerosol can does not need to be shaken before use
- Test the adhesive on scrap membrane before adhering to check consistency in colour and texture
- Gently spray adhesive onto both surfaces being adhered (apply to EPDM membrane last)
- Aim to have a distance of 20-30cm between spray and surface of material
- Take care to avoid areas of accumulation of adhesive and to not spray over seaming areas
- Ensure temperatures when performing application are between 5°C and 35°C
- In high temperatures, protect canister from direct sunlight to prevent overheating
- Allow the adhesive to flash off until tacky
- Use the touch- push test procedure to test adhesive for dryness before mating membrane to substrate
- More porous substrates, e.g. concrete, may acquire additional coat of adhesive to ensure maximum adhesion
Storage
- Store at room temperature (10°C and 25°C) in dry, well ventilated area
- Storage at temperatures under 5°C will make product unusable
- Due to high flammability, please keep away from sources of heat, sparks and open flame
- Do not or pierce cans
- Shelf life if all procedures are followed is 12 months
Disposal Instructions
- Empty and depressurized canisters can be disposed as old metals without precautions
- Non- empty and pressurized canisters must be disposed of as dangerous goods in accordance to legislation or local waste.
- Do not attempt to refill canisters
Safety Notice
Please note this product is highly flammable. Please keep away from possible ignition sources during storage. Cans must not be stored in locations where crushing or puncturing of canisters is possible.
Product Specifications
MPN: | 090325 |
---|---|
Brand: | Firestone |
Volume: | 750ml |
Colour: | Green |
Base: | Synthetic Rubber mix |
Pack Size: | 1 |
- Lead time of 1-2 Working Days
- This product is dispatched from Builder Depot and is available for in-store purchase.
- This product will usually be delivered via third party courier.
- Orders received by 11:00am are processed the same working day.
- Your delivery charge will be displayed in the trolley page and checkout prior to purchase.
- Once the order has been dispatched you will be sent relevant tracking information.
- This item is eligible for returns as per our Returns Policy.
£16.74
Inc VAT
£22.32 Per L