- 2.5l Contact based adhesive for EPDM
- Specifically designed for bonding RubberCover EPDM membranes to insulations
- Easily applied to wood, masonry, metal and other substrates
- Excellent tack time- versatile in all kinds of installation
- Useable in large range of temperatures
Product Information
Elevate’s RubberCover Bonding Adhesive is specially designed for maximum adhesion when bonding EPDM membranes to approved substrates and insulation. With a guaranteed fast tack time and great resistance to ageing and changing temperature. This product is perfectly matched to RubberCover membranes for small residential flat roof projects and renovations.
Key Features
- Solvent based contact adhesive (2.5 L)
- Fantastic resistance to ageing
- Versatile use on a number of appropriate substrates
- Between 2.35- 3m ² of surface coverage (two sides) per litre
- Adhesive can be applied with solvent resistant roller or any approved spray equipment
Technical Information
- Base: Blend of Synthetic rubber
- Contained solvents: Naphtha, Cyclohexane, Propylacetate, Butanone
- Hazardous: Flammable
- Solids: 40 ± 3 %
- Flashpoint: -19 °C
- Colour: Green
- Shelf life 12 months
Application Instructions
- Ensure surfaces are clean, dry and free of foreign materials before mating
- Remove any moisture or contaminants from surface before application
- Avoid contact with mineral and vegetable oils, grease and petroleum based products
- Stir adhesive thoroughly before and during use to achieve best adhesion and prevent marbling
- If adhesive has been exposed to temperatures lower than 10 °C for prolonged period, restore adhesive to room temperature (between 15-25 °C) before use
- Apply adhesive to both substrate and membrane being adhered at the same time to allow same drying time
- Avoid areas of accumulation on the adhering surfaces by either using a manual solvent resistant roller or suitable spraying equipment to evenly spread the adhesive
- Ensure temperatures when performing application are between 5°C and 35°C
- Allow the adhesive to flash off until tacky
- Use the touch- push test procedure to test adhesive for dryness before mating membrane to substrate
- More porous substrates, e.g concrete, may acquire additional coat of adhesive to ensure maximum adhesion
Storage
- Due to flammability, ensure product in kept away from sources of open flame, heat or sparks Store unopened pails vertically in room temperature
- Store in dry, ventilated area
- Shelf life if all procedures are followed is 12 months. Use within 48 hours of opening
Approvals
BBA approved
Safety notice
Please note this product is highly flammable. Please keep away from possible ignition sources during storage and use and do not smoke while using. Please only use product in well ventilated areas and keep out of reach from children. Protect all roof openings, objects and persons expose to the adhesive.
Please see Safety Data Sheet for more safety details.
Product Specifications
Brand: | Firestone |
---|---|
MPN: | 090331 |
Volume: | 2.5L |
Colour: | Green |
Tin Colour: | Grey |
Base: | Synthetic Rubber mix |
Pack Size: | 1 |
Diameter(Top): | 210mm |
Diameter(Bottom): | 180mm |
Height: | 180mm |
- Lead time of 1-2 Working Days
- This product is dispatched from Builder Depot and is available for in-store purchase.
- This product will usually be delivered via third party courier.
- Orders received by 11:00am are processed the same working day.
- Your delivery charge will be displayed in the trolley page and checkout prior to purchase.
- Once the order has been dispatched you will be sent relevant tracking information.
- This item is eligible for returns as per our Returns Policy.