The Ronseal Kitchen & Bathroom Repair Kit can be used on porcelain, enamel, acrylic and fibreglass. It's an incredibly versatile and reliable filler for repairing cracks and chips on your sink, bath and other appliances.

Key Features

• Suitable for porcelain, enamel, acrylic and fibreglass
• White colour to match most appliances
• Completely waterproof
• Apply using a brush
• Resistant to mould

Technical Information

• Number of coats: 2-3
• Coverage: Up to 8m² per litre
• Enamel dry time: 24 hours
• Filler dry time: 30 minutes
• Coat time: 24 hours
• VOC: High

Product Includes

• Bottle of touch-up enamel
• Foil pack of hardener
• Small applicator
• Tube of filler

Preparation Instructions

• Make sure the area is clean, dry and well ventilated
• Test the colour of the enamel on a hidden area
• Sand the damaged area and wipe with a damp cloth
• Leave to dry before using the repair kit

Application Instructions

• Mix a small amount of hardener into the filer, ensuring it's all blended together
• Use the applicator to pack the filler into the chip, leaving it raised slightly above the surface
• After waiting 30 minutes, sand to a smooth finish
• Use brown sandpaper for enamel and porcelain and black sandpaper with water for ceramic and fibreglass
• Remove any dust and leave to dry
• Shake the bottle of touch-up enamel for two minutes and then apply one thin coat
• Allow two hours to dry and then apply another one or two coats
• Leave for 24 hours before getting wet and 4 days before submerging