Ronseal Direct to Metal Paint can be applied directly to rusty metal and provides an impressive 15 years of protection.

Key Features

• Suitable for use on interior and exterior bare metal, galvanised steel, stainless steel, wood, cast iron, aluminium and PVC
• 3 coats are best for rusty metal and ultimate protection
• Apply using a roller, brush or spray
• Protects metals from rusting
• Showerproof in 30 minutes
• Can be applied over rust
• Pleasing gloss finish
• Recoat in 2-4 hours
• 15 year protection
• No primer needed
• White colour
• Water-based
• Low odour

Technical Information

• Dry time: Showerproof in 30 minutes
• Coverage: 8m² per litre
• Number of coats: 2-3 coats
• Coat time: 2-4 hours
• Volume: 750ml
• VOC: Low

Application Instructions

• Stir for 2-3 minutes before applying with a paintbrush or roller
• To spray this paint, dilute the paint in 10% water or follow your sprayers instructions
• Leave 2-4 hours before applying your second coat
• Apply 3 coats for maximum protection

Maintenance Instructions

• Wash brushes in warm, soapy water
• Check for imperfections every year
• If you notice imperfections, sand off any loose bits and reapply 2 coats of Direct to Metal Paint