Plascrete Sanitary Kitchen and Bathroom Silicone 310ml provides excellent protection from mould in areas of high humidity, such as bathrooms and kitchens. This sanitary formula silicone creates a watertight, flexible seal in joints around baths, basins, showers, sinks and sanitary ware, ensuring long-lasting waterproof and mould-resistant protection.

Key Features

• Contains anti-fungal agents to prevent mould growth in humid areas
• Ideal for sealing joints around sanitary ware, baths, showers and basins
• Provides a long-lasting, watertight, flexible seal when cured
• Cures under the influence of humidity
• Versatile multi-use silicone
• Sanitary formula
• Waterproof

Technical Information

• Colour: Available in both white and clear
• Curing time: 3mm per 24 hours at +23°C
• Skin formation: 5-6 mins at +23°C
• Tensile strength: 1,30 N/ mm²
• Joint movement: 12,5%
• Volume: 310ml

Application Instructions

• Ensure surfaces are clean and dry before applying the product. Adhesion tests before application are recommended
• Cut the cartridge seal and screw on the nozzle, cut to the required size
• Using a skeleton gun, apply the sealant into the joint/gap ensuring a good, solid fill
• For use in deep joints, reduce the joint depth to 50% of the joint’s width by using an expanding foam filler or a joint backer rod before applying the sealant
• Tool using a spatula or stick with neutral soapy water within 5 minutes of application
• For sealing around baths, fill the bath half full of water to provide a mid-point for joint movement. Empty when the sealant is fully cured

Approvals

• EN 15651-1: F- EXT–INT–CC 12.5E
• EN 15651-2: G-CC
• EN 15651-3: S XS1

Want to know more about mould prevention? See our handy Preventing & Removing Mould buying guide.