The Manrose 100mm Chrome Timer Extractor Fan is easy to install and suitable for wall and ceiling mounting. Its stylish chrome finish has a sleek appearance, and its flush-fitting helps the bathroom extractor fan blend in with the room's decor.

Key Features

• The fan is suitable for installation in bathroom zones 2 and 3, where it is not accessible to a person in the shower or bath, and should be mounted at least 1.8m from the floor
• When installing the fan, a double pole isolating switch must have a contact separation of at least 3mm in all poles and must be used with a 3 amp fuse
• Designed for mounting through 100mm diameter flexible or rigid pipes, or Manrose low profile, flat channel ducting systems
• The long-life motor ensures the extractor does not need to be replaced regularly
• This Manrose extractor fan is double insulated and does not require an earth
• All wiring during installation must comply with current IEE wiring regulations
• Has a thin 10mm profile, allowing the fan to sit flush with the wall or ceiling
• Complies with (F1) building regulations on ventilation
• Ideal for installation in bathrooms and utilities
• Suitable for both wall and ceiling mounting
• Fits unobtrusively into walls and ceilings
• More discreet and flush-fitting design
• Easy to install and maintain
• Quiet and efficient
• Single phase

Technical Information

• Maximum Operating Temperature: 40 Degrees Celsius
• Extraction Rate: 85m3/h / 32l/s
• Maximum Timer: 20 Minutes
• Control Type: Run-On Timer
• Running Mode: Intermittent
• Maximum Pressure: 20 p.a
• Spigot Diameter: 100mm
• Sound Volume: 41 dB(A)
• Adjustable Timer: Yes
• Fan Speed: 2400 rpm
• Voltage: 220-240V
• Grille Type: Open
• Frequency: 50Hz
• Height: 140mm
• IP Rating: IP44
• Finish: Chrome
• Depth: 110mm
• Width: 140mm
• Power: 15 W