Lumberjack 502 All Purpose Weatherproof Wood Adhesive 5L can be used internally and externally and provides a high strength, impact resistance bond that is usually stronger than the wood itself. Ideal for all general woodworking and joinery uses, furniture assembly and household DIY use. Dries clear and is fast curing, initial set in just 10 minutes.

Key features

• Excellent rate of bond strength development
• High degree of water resistance. D3 Classification joints may be subject to short term water contact or exposure to high humidity
• Interior or exterior use
• Low timber staining characteristics - will not stain
• Creep Resistant - Conforms to EN14256 Resistance to static load
• Water based - environmentally friendly and easy clean up
• Suitable for radio frequency cure

Application

Apply adhesive thinly to both surfaces. Do not over apply as this will slow down cure. Clamp surfaces together until adhesive dries (off in 1-2 hours: full strength 8 hours). Support until fully cured (8 hours at 20 ° C). When fitting dowels, the adhesive should be applied to the holes.