In stock
SKU
L037063
Click & Collect
£25.14
Inc VAT
£1.01 Per KG
The KA Tanking Slurry waterproofing system provides a solution to water leakage, ingress or seepage in concrete structures or any cementitious substrate. The formation and development of insoluble crystals into water bearing capillaries and fissures effectively blocks the further passage of water and ensures permanent water tightness for the life of the structure.
Coverage rate of 7-8m²/bucket for the 2 coat application (up to 16m² per coat, per bucket)
Product Information
The KA Tanking Slurry waterproofing system provides a solution to water leakage, ingress or seepage in concrete structures or any cementitious substrate. The formation and development of insoluble crystals into water bearing capillaries and fissures effectively blocks the further passage of water and ensures permanent water tightness for the life of the structure. KA tanking Slurry can be applied to new or old structurally sound surfaces. It can be applied either to the negative or the positive side and will negate dampness in ground water permeation even under hydrostatic pressure.
Key Features
Application
On site KA tanking slurry is mixed with water to form a smooth paste. The paste is applied directly to concrete or masonry structures and penetrates a short distance into capillary cracks, fissures and pores in the surface of the concrete. The presence of water and free lime causes the tanking slurry to form insoluble crystals which block the pores and prevent passage of water. This effectively makes the concrete water tight for the lifetime of the structure. KA Tanking Slurry can be applied by brush or spray to new or old structurally sound surfaces, without a bonding coat, either to the internal or the external side. It can be applied to both horizontal and vertical surfaces. Surfaces should be prepared to have a capillary open structure. The waterproofing barrier should run continuously around the whole structure. The product is for use where the basement is above the level of the water table. KA Tanking Slurry can be used for the three grades of protection of basements Grade I for car parking, Grade 2 for plant rooms, workshops and garages, Grade 3 for residential and commercial areas KA Tanking Slurry has passed the tests of VVRAS Water Regulations Advisory Scheme, B56920 and is approved for drinking water structures such as reservoirs and concrete drinking water tanks. It can also be used in swimming pools, retaining walls, tunnels and lift shafts.
Key Features
- Solution to water Leakage
- Can be applied externally & internally
- Can be used new or old structurally sound surfaces
- supplied in powder form in 25Kg plastic tubs
Application
On site KA tanking slurry is mixed with water to form a smooth paste. The paste is applied directly to concrete or masonry structures and penetrates a short distance into capillary cracks, fissures and pores in the surface of the concrete. The presence of water and free lime causes the tanking slurry to form insoluble crystals which block the pores and prevent passage of water. This effectively makes the concrete water tight for the lifetime of the structure. KA Tanking Slurry can be applied by brush or spray to new or old structurally sound surfaces, without a bonding coat, either to the internal or the external side. It can be applied to both horizontal and vertical surfaces. Surfaces should be prepared to have a capillary open structure. The waterproofing barrier should run continuously around the whole structure. The product is for use where the basement is above the level of the water table. KA Tanking Slurry can be used for the three grades of protection of basements Grade I for car parking, Grade 2 for plant rooms, workshops and garages, Grade 3 for residential and commercial areas KA Tanking Slurry has passed the tests of VVRAS Water Regulations Advisory Scheme, B56920 and is approved for drinking water structures such as reservoirs and concrete drinking water tanks. It can also be used in swimming pools, retaining walls, tunnels and lift shafts.
Product Specifications
Brand: | Kenyon |
---|---|
MPN: | KATS25G |
Pack Size: | 1 |
Colour: | Grey |
Volume: | 25Kg |
- Lead time of 2-3 Working Days
- This product is dispatched from Builder Depot and is available for in-store purchase.
- This product will usually be delivered via third party courier.
- Orders received by 11:00am are processed the same working day.
- Your delivery charge will be displayed in the trolley page and checkout prior to purchase.
- Once the order has been dispatched you will be sent relevant tracking information.
- This item is eligible for returns as per our Returns Policy.
- For larger and heavier products please ensure you have adequate labor onsite to accept the goods and offload.