The Fila Progrip Anti-Slip Surface Treatment 1L is an anti-slip coating for use on a range of flooring surfaces. By creating a microporous surface, this floor coating increases slip resistance on tiles, granite and siliceous stone. This treatment dries transparent to maintain the original look of the surface.

Key Features

• Suitable for use on porcelain tiles, ceramic tiles, siliceous stone and granite
• Ideal for ramps, shower floors, stairs and around swimming pools
• Provides slip resistance on floors for safer walkability
• Performs well without leaving any residue or film
• Creates a microporous surface for a better grip
• Remains effective on damp and wet floors
• Increases the surface's friction coefficient

Technical Information

• Application temperature: 10-30°C
• Coverage: 8-10m² per litre
• Contact time: 1-2 minutes
• Container type: Jerry can
• VOC content: 15.05g/L
• Density: 1.01kg/L
• pH value: 4
• Volume: 1L
• Brand: Fila

Application Instructions

1. Ensure the surface is dry and clean before application
2. As a test, apply the treatment. After 1 minute, check if it's dry. Leave it for longer if needed
3. Continue applying the treatment to small areas of the surface using a fleece pad or white pad
4. Leave it to dry for as long as the test application took
5. Once dry, clean the surface with a liquid vacuum or remove the residue with a cloth or mop
6. Rinse thoroughly with water

Approvals

• EN 16165

Product Disclaimer

• Please note that if this product is walked over before the correct contact time, it can cause the material to lose its colour
• This product is not suitable for application on porcelain that has a polished or lappato finish, or glass
• This treatment is not recommended for application on surfaces exposed to direct sunlight
• This product may reduce the glossiness of the treated surface