The Fila Deterdek Pro End Of Work Cleaner 5L is suitable for use on all acid resistant material. It removes grout residues and building dirt, also removes any saline efflorescence from terracotta, lime scale deposits from wall and floors . A penetrating cleaner for external paving, removes rust stains on tiles, all in one detergent and descaler. London Underground approved.

For Use On

• Terracotta
• Quarry Tiles
• Porcelain Tiles
• Glazed Ceramic Tiles
• Acid-Resistant Stone Surfaces

Purpose

• Removes post-application deposits and building-site dirt
• Eliminates saline efflorescences from terracotta
• Eliminates lime-scale from floors, showers, bathroom and fittings
• Thoroughly cleans outdoor floors
• It removes cementitious deposits and cleans at the same time because it also contains surfactants
• Effective against rust stains

Advantages

• Buffered acid, does not produce harmful fumes for the user and the environment: it does not contain hydrochloric acid
• Does not change the appearance or colour of materials
• It cleans but does not attack
• Does not affect grouting
• Does not ruin profiles or items in aluminium and steel (kitchen hoods, pipes)
• It is also effective in removing grout residues

Coverage

• With one Litre: Terracotta 1:5. 10/20 m2, Porcelain tiles 1:5. 40 m2 and Natural stone 1:5-1:10 20/35 m2

Application

• Dilution: between 1:5 and 1:10 according to the level of dirt to be removed
• Washing after laying: wet the surface well with water before washing. Then use Deterdek diluted at a ratio of 1:5 or 1:10 (1 litre of product in 5 or 10 litres of water)
• Apply the solution a few square metres at a time, then add, allow contact time of 5 minutes, then work with a single disc cleaner or large brush. Remove all residues using a cloth or liquid vacuum and rinse with plenty of water
• Should any stubborn dirt remain, repeat the wash with more concentrated solutions
• For extraordinary maintenance on outdoor surfaces with clear signs of ageing (smog, dust...): dilute 1 litre of product in 10 litres of water. Then follow the same application procedures described above

Important Information

• Do not use on polished marble or on any materials that are sensitive to acids
• Before using on this material, carry out a test on a small surface area to check that it is actually resistant to the product
• For items in aluminium, follow the instructions and use a soft sponge