The Evo-Stik Sticks Like Sh*t Adhesive White 290ml is an instant grab adhesive formulated for a superior bonding strength. Formulated to be solvent-free, it can be applied to almost all building materials, even when the surfaces are wet. This adhesive is weatherproof, water-resistant, and designed to withstand extreme temperatures, making it a reliable choice for both indoor and outdoor applications.

Key Features

• Suitable for wood, concrete, brick, glass, ceramics, plaster, insulation boards and polystyrene
• Remains durable under extreme temperatures and movement without losing strength
• Solvent-free base with a very low odour ensures a safer application
• Delivers weatherproof and water-resistant protection
• Provides an instant grab and impressive strength
• Designed for both interior and exterior use

Technical Information

• Coverage: 14m of a 5mm bead per cartridge
• Temperature resistance: -40 to 90°C
• Application temperature: 5-40°C
• Touch dry time: 30-40 minutes
• Tensile strength: 2.05 N/mm²
• Specific gravity: 1.60 g/ml
• Composition: SM Polymer
• Shelf life: 18 months
• Cure time: 24 hours
• Volume: 290ml
• Colour: White

Application Instructions

1. Ensure all surfaces are clean, stable and free from grease, dust or contaminants
2. Cut the nozzle to the desired width and angle. Screw the nozzle onto the cartridge
3. Insert into a cartridge gun and squeeze the trigger until the adhesive appears
4. Apply 3-5mm parallel beads of adhesive on one side of the materials
5. Press the materials together firmly before the adhesive skins over
6. Avoid applying a perimeter bead to reduce the cure time

Product Disclaimer

• Please note that this product is only compatible with the ProDec Advance Revolving Caulking Gun and the ProDec Extra Strong Skeleton Caulking Gun
• Do not use on mirrors with a plastic safety film or mirrors being applied to painted surfaces
• Do not use on surfaces contaminated with bitumen or in continuously damp environments
• Yellowing may occur if stored or used in predominantly dark conditions
• Not suitable for bonding polyethylene, polypropylene or Teflon