The Evo-Stik Sanitary Silicone Sealant 280ml is an acetoxy-cure silicone sealant ideal for sinks, showers, baths and kitchen fittings. Designed for lasting protection in moist areas, it contains a fungicide that actively resists mould and mildew. This sealant is best suited for use on non-porous surfaces like ceramic, stainless steel, glass and plastic.

Key Features

• Provides excellent adhesion to non-porous surfaces, including glass, ceramic, stainless steel and plastic
• Ideal for sealing sanitary areas around baths, showers, sinks and kitchen worktops
• Features high durability without cracking, shrinking or discolouration over time
• Formulated with a fungicide to help prevent the build-up of mould and mildew
• Offers immediate waterproofing after application for added convenience

Technical Information

• Temperature resistance: -40 to 120°C
• Application temperature: 5-40°C
• Tensile strength: 0.75N per mm²
• Coverage: 10m per 6mm bead
• Specific gravity: 0.97g per ml
• Cure rate: 2mm per 24 hours
• Skin over time: 12 minutes
• Modulus: 0.28N per mm²
• Shelf life: 18 months
• Volume: 280ml

Application Instructions

1. Ensure all surfaces are dry, clean and free from dust, grease or old sealant
2. Insert the cartridge into a sealant gun and cut the nozzle to the desired width at a 45° angle
3. Apply a continuous bead along the joint, ensuring full contact on both sides
4. Smooth the sealant with a wet, rounded tool within 12 minutes for a clean finish
5. Wipe away excess sealant using white spirit and remove any masking tape if used

Product Disclaimer

• Not suitable for PE, PP, PTFE, PC, PMMA, soft plastics, neoprene or bituminous substrates
• Not suitable for use on marble, concrete, lead, copper or galvanised steel
• Please note that this product cannot be overpainted