The Evo-Stik Frame Silicone Sealant 290ml is a neutral-cure, low-modulus silicone ideal for high-movement joints in window and door frames. It offers long-lasting flexibility and weather resistance for consistent protection. Designed to bond without a primer, this silicone sealant is compatible with a wide range of building materials, including aluminium, hardwood, uPVC and more.

Key Features

• Suitable for aluminium, hardwood and PVCu window and door frame joints
• Adheres to most common building surfaces without requiring a primer
• Performs exceptionally well in joints with high levels of movement
• Resists UV, water and weather for extended durability
• Provides a long-lasting, waterproof and flexible seal

Technical Information

• Service temperature: -40 to 120°C
• Application temperature: 5-40°C
• Tensile strength: 0.40N per mm²
• Coverage: 10m per 6mm bead
• Cure time for 2mm: 24 hours
• Specific gravity: 1g per ml
• Skin over time: 9 minutes
• Shelf life: 12 months
• Volume: 290ml

Application Instructions

1. Ensure all surfaces are clean, dry and free from dust, frost or grease before application
2. Cut the cartridge dome, screw on the nozzle, and trim at a 45° angle to match joint width
3. Insert into a sealant gun and apply a bead while maintaining contact with both joint sides
4. Tool the sealant with a wet, rounded tool within 9 minutes for a smooth finish
5. Wipe away any excess with white spirit and remove masking tape if used

Approvals

• EN 15651-1:2012

Product Disclaimer

• Not suitable for insulating glass unit bedding or where glass edge seal compatibility is unknown
• Discolouration may occur in dark environments or upon contact with certain chemicals
• Do not use on frost-contaminated surfaces or areas exposed to constant abrasion
• Not suitable for submerged joints in porous materials or for use with bitumen
• Do not use on PE, PP, PTFE, soft plastics, neoprene or bituminous substrates
• Please note that this sealant cannot be overpainted