The Sika Stixall Extreme Power Crystal Clear 290ml is a one-part adhesive with sealant properties. It bonds a vast range of building materials and can be applied both internally and externally. Featuring a combination of silicone and polyurethane technologies, this solvent-free adhesive and sealant offers outstanding adhesion strength and waterproof protection.

Key Features

• Works effectively on wet surfaces and cures to a water and weatherproof finish
• Suitable for use on metal, wood, plastic, glass, polyester, plaster and concrete
• Formulated for both sealing and bonding applications inside or outdoors
• Solvent-free formula with no odour, suitable for use in confined spaces
• Can be overpainted with water-based paints once fully cured
• Excellent performance on windows, doors and mirrors
• Intended for both adhesive and sealant use on interiors
• Intended for adhesive use on exteriors
• Offers excellent initial grab

Technical Information

• Thermal resistance: -40°C to +100°C
• Curing time for 1mm: 24 hours
• Tensile strength: 1.5MPa
• Density: 1.5g per cm
• Shelf life: 12 months
• Chemical base: STP
• Shrinkage: 10%
• Volume: 290ml
• Colour: Clear

Application Instructions

1. Cut cartridge tip, fix nozzle and cut to desired bead size before applying with a sealant gun
2. For plasterboard, wall panels, worktops etc: apply adhesive around the edges (30-50mm from edge). Cover the rear with beads of adhesive at 300mm intervals and press into place
3. For decorative mouldings: Apply adhesive to the rear of the object in one or two continuous beads and press immediately into place. Fill any gaps with thicker beads of adhesive
4. As a sealant: Use masking tape to protect the surfaces. Tool the joint within 5 minutes of applying the sealant
5. Clean excess material with a damp cloth or white spirit before curing

Approvals

• EN15651-1:2012 F-INT
• ISO7390

Product Disclaimer

• May stain and discolour reconstituted or natural stone like granite, marble and limestone
• In areas of high UV, some darkening or discolouration of the product may occur
• Not suitable for use in permanently submerged areas or aquariums
• Do not use on bitumen, asphalt, or surfaces that bleed plasticisers
• Certified as a sealant for internal use only
• Do not overpaint before full cure