DuPont Insta-Stik Multi Purpose Adhesive Gun Grade 750ml is a fast-curing polyurethane aerosol adhesive intended for both vertical and horizontal applications. Designed to fit a gun for precise operation, it can quickly bond insulation boards and plasterboards to a variety of surfaces. This adhesive features a low-expansion formula for a more secure hold with minimal waste.

Key Features

• Suitable for wood, concrete, render, plasterboard, metal, mineral wool and insulation boards
• Versatile application ability can achieve both vertical and horizontal lines
• Crafted with an environmentally safe, non-CFC and non-HCFC propellant
• Applies with a gun to ensure precise and accurate lines for less mess
• Extremely fast 12-hour cure for quick installation turnaround
• Can be applied to various bituminous substrates

Technical Information

• Service temperature: -40 to 100°C
• Application temperature: 5-35°C
• Tack free time: 5 minutes
• Cut time: 15 minutes
• Shelf life: 18 months
• Cure time: 12 hours
• Colour: Light yellow
• Volume: 750ml

Application Instructions

1. Ensure surfaces are dry, clean and free of dust, oil or grease before application
2. Shake the can vigorously at least 20 times before attaching it to the gun
3. Screw the gun onto the valve and open the dosing knob
4. Ensure the can is positioned upright with the valve down and pull the trigger
5. Empty the first 10-20g of product beforehand
6. Use the trigger and/or dosing knob to control the application

Approvals

• DIN 4102-1
• EN17333-3

Product Disclaimer

• Not suitable for application on polyethylene or polyolefin foils, silicone, or heavily contaminated surfaces
• Please note that once cured, the foam can only be removed mechanically