In stock
SKU
H003729
Click & Collect
£62.94
Inc VAT
£6.30 Per KG
- Cromar PRO GRP Resin is a medium reactive polyester resin tailored for roofing applications
- The resin's low viscosity enables efficient fibre wet-out, facilitating effective application
- It offers a long pot life and quick curing, enhancing convenience in the application process
- The resin boasts superior mechanical properties, ensuring durability and strength in roofing projects
Product Information
Cromar ProGRP is a Glass Reinforced Polyester flat roof system designed and engineered for flat roof applications. ProGRP is a fully integrated all in one system where the components work together on virtually all types of flat roofs and vertical surfaces in any domestic or commercial application to provide the perfect all weather protection.
The ProGRG fibreglass resin is a pre-accelerated, thixotropic, orthophthalic resin formulated for extremely low styrene emission. The correct ratio of resin to glass fibre chop strand mat (450gsm) is 1.5 litres of resin per m² of mat. 600gsm mat will use approx. 33% more, the thicker the mat, the more resin is needed.
Laminate
When a laminate is built up in stages with intermediate curing, each operation should be finished off with a normal resin / glass fibre ratio. Any surface area of a cured laminate having an excess of resin, must be abraded before the laminating is continued. With a normal resin / glass fibre ratio on the laminate surface, the interval between each operation must not exceed 48 hours without abrasion.
Key Features
Note
Prolonged storage or unfavourable storage conditions may cause slight separation, agitation of resin is recommended before use.
The ProGRG fibreglass resin is a pre-accelerated, thixotropic, orthophthalic resin formulated for extremely low styrene emission. The correct ratio of resin to glass fibre chop strand mat (450gsm) is 1.5 litres of resin per m² of mat. 600gsm mat will use approx. 33% more, the thicker the mat, the more resin is needed.
Laminate
When a laminate is built up in stages with intermediate curing, each operation should be finished off with a normal resin / glass fibre ratio. Any surface area of a cured laminate having an excess of resin, must be abraded before the laminating is continued. With a normal resin / glass fibre ratio on the laminate surface, the interval between each operation must not exceed 48 hours without abrasion.
Key Features
- Very low styrene emission resulting in lower styrene levels in working atmospheres
- Improved water resistance
- Low viscosity for rapid and efficient fibre wet out in both hand and spray lay-up
- Long pot life combined with rapid cure
- Lower exotherm allowing thick sections to ne fabricated with reduced risk of distortion
- Approved by Lloyds Register of shipping for use in the construction of boats moulded under their survey
- 25 year manufacturers warranty when installed by an approved PRO GRP contractor
Note
Prolonged storage or unfavourable storage conditions may cause slight separation, agitation of resin is recommended before use.
Product Specifications
| Brand: | Cromar |
|---|---|
| MPN: | G25/RES10 |
| Pack Size: | 1 |
| Volume: | 10Kg |
- Lead time of 1-2 Working Days
- This product is dispatched from Builder Depot and is available for in-store purchase.
- This product will usually be delivered via third party courier.
- Orders received by 11:00am are processed the same working day.
- Your delivery charge will be displayed in the trolley page and checkout prior to purchase.
- Once the order has been dispatched you will be sent relevant tracking information.
- This item is eligible for returns as per our Returns Policy.