C-Tec Superfast Plus Adhesive is a highly effective multipurpose clear adhesive, expertly designed to bond with a versatile range of materials. This superglue is able to bond in seconds and produces long-lasting results. The product is resistant to solvents, oils, benzene, temperature fluctuations and atmospheric conditions. Superfast is strong, colourless and bonds quickly.

Bonds with most common materials, including: ABS, aluminium, Bakelite, bronze, butyl, celluloid, chloroprene, chrome, Delrin, glass, copper, natural rubber, NBR, neoprene, nitrile, nylon, phenol, polycarbonate, polystyrene, porcelain, hard PVC, stainless steel. Doesn't bond with plastic materials containing polyethylene, polyproplene and fluorine. Curing time may be effected by porosity of materials.

Key Features

• Non-solvent based adhesive
• 8 seconds bonding time at 20°C
• Special Cyanoacrylate-based formula
• High tensile strength and no shrinkage
• Resistant to solvents, oils and benzene
• Doesn't require heating, mixing or soldering
• Can be used on a wide range of common materials
• Temperature resistant between -60°C up to 100°C, with an 80°C flashpoint

Technical Information

• Flash point: 80°C
• Colour: Transparent
• Gap fill when cured: 0.1mm
• Fixture speed: 8 seconds at 20°C
• Typical strength when cured: 5-28 N/mm²

Application Instructions

• Do not heat, mix or solder product before use
• For more porous materials, use C-Tec Superfast Plus Activator 150ml first to ensure secure bonding
• Apply economically onto dry, degreased surfaces and hold surfaces together until bonded (bonding time may vary between materials)

Safety Note

Please note this product can cause serious skin, eye and respiratory irritation.