In stock
SKU
H002947
Click & Collect
£82.75
Inc VAT
- Ecotherm Eco Liner Insulated Plasterboard has a fibre-free rigid polyisocyanurate (PIR) insulation core
- The 2 in 1 board insulates and dry lines walls in one application
- The insulation facing has a high water vapour resistance
- Dimensions: 82.5mm x 2400mm x 1200mm
- Thermal conductivity of 0.022W/mK
Product Information
Ecotherm Eco-Liner Composite insulated panel comprising a fibre free polyisocyanurate (PIR) insulation core with a bilaminatefoil/kraft paper facing on the outer, and bonded to a 12.5mm tapered edge gypsum Plasterboard on the inner facing for internal dry lining applications.
Applications
Room side insulation responds quickly to heating systems and applications include upgrading the thermal performance of existing walls, providing a cost effective means of reducing CO2 emissions and for compliance with Building Regulations/Standards.
Ideal for:
Walls Room-in-the-roof applications Pitched roofs/Cold flat roofs Both new build and renovations
DIMENSIONS
Available in standard sizes and various thicknesses as shown below:
Width: 1200mm
Length: 2400mm
Thickness: 37.5mm to 92.5mm (insulation + plasterboard)
COMPRESSIVE STRENGTH
The typical compressive strength of the insulation is 140 kPa when tested at 10% compression to BS EN 826:2013 Thermal Insulating Products for Building Applications - Determination of Compression Behaviour.
DURABILITY
The product is stable, rot proof and durable and when correctly installed has an indefinite life. Durability depends on the method of application, the supporting structure and conditions of use. It should not be used to isolate dampness nor be used in continuously damp/humid conditions. The fibre free insulation core and facings resist attack from mould and microbial growth and do not provide any food value for vermin.
RESISTANCE TO SOLVENTS
PIR insulation resists attack from alkalis, dilute acids, mineral oil and petrol. The fibre free insulation core is not resistant to ketonic solvents. Damaged boards should not be used.
THERMAL CONDUCTIVITY
The thermal conductivity (lambda/λ - value) of the insulation is 0.022W/mK.
The 12.5mm gypsum plasterboard element has a thermal conductivity (lambda/λ - value) of 0.19W/mK.
EcoTherm insulation lambda and thermal resistance values stated in this datasheet are in accordance with BS EN 13165: 2012 + A2: 2016 (Thermal insulation products for buildings. Factory made rigid polyurethane foam (PU) products. Specification).
WATER VAPOUR RESISTANCE
Eco-Liner has an integral vapour control layer to minimise the risk of interstitial condensation. If increased water vapour resistance is required, apply 2 coats of a proprietary sealer in drylined/taped/jointed systems.
The insulation facing has a high water vapour resistance and will, therefore, provide a significant resistance to water vapour transmission.
Applications
Room side insulation responds quickly to heating systems and applications include upgrading the thermal performance of existing walls, providing a cost effective means of reducing CO2 emissions and for compliance with Building Regulations/Standards.
Ideal for:
DIMENSIONS
Available in standard sizes and various thicknesses as shown below:
Width: 1200mm
Length: 2400mm
Thickness: 37.5mm to 92.5mm (insulation + plasterboard)
COMPRESSIVE STRENGTH
The typical compressive strength of the insulation is 140 kPa when tested at 10% compression to BS EN 826:2013 Thermal Insulating Products for Building Applications - Determination of Compression Behaviour.
DURABILITY
The product is stable, rot proof and durable and when correctly installed has an indefinite life. Durability depends on the method of application, the supporting structure and conditions of use. It should not be used to isolate dampness nor be used in continuously damp/humid conditions. The fibre free insulation core and facings resist attack from mould and microbial growth and do not provide any food value for vermin.
RESISTANCE TO SOLVENTS
PIR insulation resists attack from alkalis, dilute acids, mineral oil and petrol. The fibre free insulation core is not resistant to ketonic solvents. Damaged boards should not be used.
THERMAL CONDUCTIVITY
The thermal conductivity (lambda/λ - value) of the insulation is 0.022W/mK.
The 12.5mm gypsum plasterboard element has a thermal conductivity (lambda/λ - value) of 0.19W/mK.
EcoTherm insulation lambda and thermal resistance values stated in this datasheet are in accordance with BS EN 13165: 2012 + A2: 2016 (Thermal insulation products for buildings. Factory made rigid polyurethane foam (PU) products. Specification).
WATER VAPOUR RESISTANCE
Eco-Liner has an integral vapour control layer to minimise the risk of interstitial condensation. If increased water vapour resistance is required, apply 2 coats of a proprietary sealer in drylined/taped/jointed systems.
The insulation facing has a high water vapour resistance and will, therefore, provide a significant resistance to water vapour transmission.
Visit our handy guide for answers to questions like how much for cavity wall insulation?
Product Specifications
Brand: | Ecotherm |
---|---|
MPN: | 100000021530 |
Pack Size: | 1 |
Unit of Sale: | Pack |
Boards Per Pack: | 1 |
Product Weight (KG): | 31 |
Width: | 1200 |
Length: | 2400 |
Thickness: | 82.5 |
Profile: | Plain |
- Lead time of 5-7 Working Days
- This product is dispatched from Builder Depot and is available for in-store purchase.
- Orders received by 11:00am are processed the same working day.
- Your delivery charge will be displayed in the trolley page and checkout prior to purchase.
- Once the order has been dispatched you will be sent relevant tracking information.
- This item is not eligible for returns as per our Returns Policy. Your statutory rights are not affected.
- The products ordered are for kerbside delivery only, for more information please see our Delivery page.