This pair of Speed Pro Gallows Brackets (375 x 375 x 75mm) provides strong chimney support once the chimney breast has been removed from the rooms below. Manufactured from welded 75mm steel angle, this larger bracket offers extra load-bearing capacity for heavier chimney breast projections. Each bracket bolts securely to the wall, allowing a lintel or steel plate to span across as a beam and carry the weight of the chimney above.

Key Features

• Supports the remaining chimney stack in the loft once the chimney breast has been removed from the rooms below, freeing up valuable living space
• Bolted securely to the wall so a lintel or steel plate can span across as a beam, carrying the weight of the chimney above
• Made from heavier 75mm steel angle, offering greater load-bearing capacity than the smaller 50mm version
• Manufactured from welded steel angle for the strength and rigidity needed to carry structural loads
• Also suitable for supporting an overhanging porch or similar projection
• Supplied as a matched pair, ready to fit either side of the stack
• Arms measure 375mm x 375mm to reach beneath the chimney stack

Technical Information

• Overall Dimensions: 375 x 375 x 75mm
• Steel Angle Section: 75 x 75mm
• Supplied: Pair
• Brand: Speed Pro

Product Disclaimer

• Please note that removing a chimney breast is structural work that must comply with the Building Regulations. Gallows brackets cannot be used in every situation, so the installation should be approved by building control and, where required, designed by a structural engineer