47mm x 305mm Speed Pro Standard Timber to Timber Jiffy Joist Hanger Galvanised Pack of 100
Speed Pro Standard Jiffy joist hanger for timber to timber is a non-welded joist hanger for supporting timber joists from timber members.
- Superior design requires fewer nails making installation quicker
- Greater load carrying capacities to other leading brands
- The wider leg allows more surface area on the supporting timber and increased nail spacing
- Designed to allow easy fixing of plaster board
Back flange of the hanger should be set against the wall when built, this process is then continued until completed height of wall is reached. Joist should be placed tight into the hangers leaving no more than a 6mm gap. Use all specified fasteners making sure not to stack heavy loads on joist during construction. If fixing the joist hangers to steel beams, shot-fired pins can be used and this should only be carried out by qualified person.
|Weight:||0.19kg each/ 19.2kg per Box|
- This product will be delivered direct from Speed Pro.
- This product is for kerbside delivery only which means the driver will unload goods at the nearest access point on the kerb outside of your property.
- Please ensure you have adequate labour onsite to accept the goods and offload.
- Failed deliveries are subject to additional re-delivery charge.
- A signature may be required for delivery.
Malcolm U. published 21/04/2019 following an order made on 09/04/2019
Anonymous customer published 24/11/2017 following an order made on 15/11/2017