This Supreme Concrete Once Weathered Concrete Coping (405 x 915mm) protects the exposed edge of brick walls from weather damage and adds a finished appearance. Its wedge-shaped profile creates a fall in one direction to allow effective water run-off, whilst the built-in drip edge helps prevent rainwater from tracking down and damaging the face brickwork.

Key Features

• The smooth concrete finish provides a clean, decorative alternative to exposed brick and mortar
• Built-in drip edge helps prevent water from running down and damaging the face brickwork
• Commonly used on boundary walls and parapets where controlled drainage is needed
• Designed to sit securely on top of brick walls and piers for long-term protection
• Durable concrete construction offers strength and resistance to weathering
• Can be painted or decorated to match existing property features
• The wedge-shaped profile directs rainwater away from the wall

Technical Information

• Brand: Supreme Concrete
• Length: 915mm / 36"
• Width: 405mm / 16"
• Material: Concrete
• Quantity: 1

Approvals

• BS EN ISO 14001: 2004
• BS EN ISO 9001: 2008
• BS 5642: Part 2
• EMS 546362
• FM 12438

Installation Instructions

1. Clean the top of the wall and lightly dampen it with water
2. Apply a bonding agent, then spread the mortar along the wall, leaving it slightly raised
3. For longer walls, fit one or two steel reinforcing bars (6mm or 8mm) and secure them into the end pillars
4. Dampen the underside of each coping stone to help it bond properly
5. Press the coping stones firmly into the mortar, leaving a 10mm gap between each one
6. Remove any excess mortar straightaway using a trowel
7. Use a straight edge and spirit level to make sure the copings are level and aligned
8. When the fixing mortar has hardened, point the copings with mortar
9. Wipe away any remaining mortar with clean water before it dries