This Speed Pro 100mm x 125mm Masonry Joist Hanger is made from welded galvanised steel for excellent durability. The joist hanger supports timber joists, beams, and trussed rafters from masonry walls with a minimum crushing strength of 3.5N/mm². It is suitable for 100mm x 125mm sized timber joists.

Key Features

• For supporting timber joists, beams, and trussed rafters built into masonry walls
• Suitable for masonry with a minimum crushing strength of 3.5N/mm²
• No special tools or rivets are required to install this joist hanger
• Fixable to steel beams using appropriate fixings
• Made of corrosion-resistant galvanised steel

Technical Information

• Characteristic Value for Eurocode 6: 6.7kN
• Safe Working Load for BS5628: 3.5kN
• Compatible Joist Size: 100 x 125mm
• Material: Galvanised Steel
• Tested By: Lucideon Ltd.
• Thickness: 2.4mm
• Brand: Speed Pro

Matching Products

• Treated Carcassing Timber

Installation Instructions

1. Always use compatible corrosion-resistant fixings and the correct mortar strength to adhere to British Standards
2. Place the back plate of the joist hanger flat against the vertical masonry support
3. Ensure the masonry flange has at least 3 courses above it (675mm of masonry). Make sure to securely fix the masonry flange or embed it adequately, and never place it in dry slots
4. Allow the masonry to fully mature before applying any load to the joist hanger
5. The joist should be square cut and sit tight to the back of the hanger with a maximum gap of 6mm
6. Nail the side flanges with 30 x 3.75 galvanised square twist nails or other suitable fixings
7. Use heavy-duty straps to provide lateral restraint

Approvals

• Galvanised steel to EN10346 DX51D Z600
• BS EN 845-1:2013+A1:2016

Product Disclaimer

Please note that the lock plate is not taken into account when calculating the loads.