In stock
SKU
H001526
Click & Collect
£40.26
Inc VAT
£4.03 Per M²
IKO Trade top sheet is a heavyweight, green slate surfaced top layer and is ideal for use as the cap sheet to a multi or single layer system on shed roofs.
Product Information
IKO trade top sheet green mineral surfaced is used as an underlay as part of a multi-layer system or as a single layer for shed/hutch roofs. It is cost effective roofing solution suitable for a wide range of projects, although it is not recommended for use on habitable buildings. This type of traditional roofing felt is composed of a fibre base saturated and then coated with bitumen and surfaced with either sand or a slate finish. Used as a single, two-layer or three-layer application, these products are for use as temporary waterproofing or for use on sheds or garden buildings.
Key Features
Application
Where applicable, Fibre Based Roofing membranes should be installed in accordance with the relevant sections of BS 8217: 2005, Code of practice for reinforced bitumen membranes for roofing' and to IKO's specifications. If applied by traditional pour and roll methods, hot bitumen is poured (or applied by a mop) in front of the roofing felt roll, which is then unrolled into the bitumen, spreading it to give a continuous coating for the full width. The membrane is applied with minimum 75 mm side and end laps. Built-up systems can equally be formed using IKOpro HP Cold Adhesive; however the general bonding principles still apply.Where using Fibre Based Roofing in a built-up system to a garage or outbuilding, it is typically installed in a two or three layer system. In a two-layer system both layers should be fully bonded, the underlay being bonded to a suitable substrate. In a three-layer system the cap sheet and intermediate layers should be fully bonded to a random nailed, or partially bonded, preparation layer depending on the substrate. Detailed specification advice is available from the IKO Technical Services Department. Where used as a single layer on a shed roof, the minimum pitch of the roof should be 20 degrees. Fibre Based Roofing should be nail fixed with the laps fully sealed in IKOpro HP Cold Adhesive.
Key Features
- Traditional products
- Economy roofing materials
- Nail fixing, cold adhesive or pour and roll hot bitumen application
Application
Where applicable, Fibre Based Roofing membranes should be installed in accordance with the relevant sections of BS 8217: 2005, Code of practice for reinforced bitumen membranes for roofing' and to IKO's specifications. If applied by traditional pour and roll methods, hot bitumen is poured (or applied by a mop) in front of the roofing felt roll, which is then unrolled into the bitumen, spreading it to give a continuous coating for the full width. The membrane is applied with minimum 75 mm side and end laps. Built-up systems can equally be formed using IKOpro HP Cold Adhesive; however the general bonding principles still apply.Where using Fibre Based Roofing in a built-up system to a garage or outbuilding, it is typically installed in a two or three layer system. In a two-layer system both layers should be fully bonded, the underlay being bonded to a suitable substrate. In a three-layer system the cap sheet and intermediate layers should be fully bonded to a random nailed, or partially bonded, preparation layer depending on the substrate. Detailed specification advice is available from the IKO Technical Services Department. Where used as a single layer on a shed roof, the minimum pitch of the roof should be 20 degrees. Fibre Based Roofing should be nail fixed with the laps fully sealed in IKOpro HP Cold Adhesive.
Product Specifications
| Brand: | IKO |
|---|---|
| MPN: | 56060000 |
| Pack Size: | 1 |
| Colour (multi): | Green |
| Width: | 1m |
| Length: | 10m |
| Size: | (W): 1m (L): 10m |
- Lead time of 1-2 Working Days
- This product is dispatched from Builder Depot and is available for in-store purchase.
- Orders received by 11:00am are processed the same working day.
- Your delivery charge will be displayed in the trolley page and checkout prior to purchase.
- Once the order has been dispatched you will be sent relevant tracking information.
- This item is eligible for returns as per our Returns Policy.
- The products ordered are for kerbside delivery only, for more information please see our Delivery page.