The Warmup DCM-PRO Cable is an electric underfloor heating cable for use with the DCM-PRO decoupling system. At just 4.5mm thick, it keeps the floor build-up low and clips into the membrane at 90mm spacing.

Key Features

• Sits within the castellations of the DCM-PRO membrane and is positioned by hand with no tools or fixings needed
• Advanced fluoropolymer (ETFE) inner insulation gives the cable long-term durability and reliable performance
• IPX7 rated, making it suitable for wet areas such as bathrooms and wet rooms
• 3m cold tail connection makes wiring back to the thermostat straightforward
• Standard-wattage blue cable delivers 150W/m² heat output at the standard 90mm spacing
• Just 4.5mm thick to keep the floor build-up to a minimum

Technical Information

• Output Rating: 150W/m² at 90mm spacing
• Inner Insulation: Advanced Fluoropolymer (ETFE)
• Operating Voltage: 220-240V, 50Hz
• Min. Installation Temp: 5°C
• Connection: 3m cold tail
• Thickness: 4.5mm
• IP Rating: IPX7
• Colour: Blue

Approvals

• UKCA
• BEAB
• CE

Guarantee

• Safety Net guarantee replaces the heater free of charge if it is accidentally damaged during installation
• Lifetime limited warranty

Product Disclaimer

• This is the heating cable only. The DCM-PRO decoupling membrane and a compatible thermostat are required to complete the system. The cable must be installed by a qualified electrician and must not be cut or shortened.