Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Ultracolor Plus Tile Grout Fast Set Water Repellent 5Kg White

Status : In stock

Delivery : Standard help

  • Buy 3 for £11.46 each and save 8%
  • Buy 5 for £10.86 each and save 13%
SKU : L001943
Inc VAT: £12.36

Quick Overview

Mapei Ultracolor Plus is a rapid setting grout suitable for interior and exterior use on walls and floors. Ultracolor Plus is mould and mildew resistant and can be used in dry and wet conditions.

For assistance, please call:

020 8362 8100

Drag image to spin
360 Ultracolor Plus Tile Grout Fast Set Water Repellent 5Kg White
Mapei Ultracolor Plus with DropEffect technology is an ultra premium, fast-setting, polymer-modified, colour-consistent, non-shrinking, efflorescence-free grout for joint widths from 2mm to 2cm. DropEffect technology reduces surface absorption to help repel water, dirt, and grime from penetrating grout joints. Ultracolor Plus is specially formulated with Mapeis high-hydrated cement technology to eliminate the common problems related to Portland-cement grout, such as colour consistency and efflorescence. It is suitable for interior and exterior residential and commercial floor and wall surfaces in dry or wet conditions. Ultracolor Plus can be used to grout dimensional stone, slate, granite, stone agglomerates and most types of ceramic, ceramic mosaic, quarry, brick paver, porcelain, glass and clay tiles. It can be exposed to foot traffic within 3 to 4 hours.

Key Features
  • Rapid setting
  • Interior and exterior use
  • Walls and floors
  • Colour-consistent
  • Dry or wet conditions
  • Mould and mildew resistant

Recommended Systems
Grouting may take place when the adhesive is completely set. The joints must be clean, free of dust and empty down to at least 2/3 of the thickness of the tiles. Any adhesive or mortar which has seeped into the joints while laying the tiles must be removed while still fresh. With very absorbent tiles, high temperatures or windy conditions dampen the joints with clean water. Preparing the mix: While stirring, pour Ultracolor Plus into a clean, rust-free container containing 21-23and#37; by weight of clean water. Mix the grout with a low-speed mixer to avoid air entrainment, until a smooth paste is obtained. Let the mix stand for 2-3 minutes, and stir again briefly before use. Use the mix within 20-25 minutes of its preparation. Applying the grout: Fill the joints with the Ultracolor Plus mix using a special MAPEI grout float or rubber squeegee, without leaving any gaps or steps. Remove any excess of Ultracolor Plus from the surface, by moving the float diagonally to the joints while the mix is still fresh.
Colour White
Unit Of Sale Each
Weight 5Kg
Brand Mapei
Barcode 8022452039072
EDP code 6010005A

Product Attachments

View FileUltracolour Plus Tile Grout Fast Set    Size: (878.46 KB) Technical Data Sheet
View FileUltracolour Plus Tile Grout Fast Set    Size: (38.16 KB) Safety Data Sheet

You must be logged in to post a question.

No comments just yet - be the first!

Product Reviews

Number of reviews : 1
Average rating : 5 /5
G. Roy
  the 26/10/2015
5/ 5
not used as yet ,will review later

There are no products matching the selection.

Post your comment

Builder Depot