Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Ultrabond ECO S955 1K 15Kg Single Component Flooring Adhesive

Status : In stock

Delivery : Big and Bulky help

SKU : L039833
Inc VAT: £79.14

Quick Overview

Mapei Ultrabond ECO is suitable for all types of wood flooring installation, Ultrabond ECO has high initial grab with excellent ridge holding and easy spreading.

Speak to our Flooring Experts:

020 8362 8145

Ultrabond ECO S955 1K 15Kg Single Component Flooring Adhesive
Move your mouse over image or click to enlarge
360 Ultrabond ECO S955 1K 15Kg Single Component Flooring Adhesive
Mapei Ultrabond Eco S955 is a single part, solvent free, siliated (MS) polymer based adhesives with extremely low VOC, can be used to install all types and sizes of wood flooring. Can be applied on most types of substrates including heated.

Key Features
  • High initial grab with excellent ridge holding.
  • Spreads with ease due to free flowing properties.
  • Timber can be adjusted for up to 2 hours.
  • Easily removed from hands and surfaces.
  • Can be re-sealed.

Surface Preparation
The substrate must be checked carefully to assess it condition and to prepare it for laying wood. Cementitious screeds must be well cured dry flat and mechanically strong the surface must be free of dust loose parts oil paint etc. The level of humidity in the screed must be measured using a carbide hygrometer to solve problems of residual humidity levels higher than those prescribed for laying wait until the screed is dry or apply a suitable waterproofing primer such as Mapeproof 1K Turbo. Cracks in the substrate must be repaired beforehand with a product such as Eporip, Eporip Turbo, Epojet. Excessively rough or uneven surfaces should be levelled using a smoothing compound with high mechanical properties such as Ultraplan Maxi, chosen accordingly to the thickness to be installed. Installation may be carried out once it has cured (see the relative product technical data sheet). To install rapid drying controlled shrinkage screeds use a special MAPEI hydraulic bind Mapecem which allows for installation after 24 hours or Topcem for installation after 4 days and wood may be laid after 4 days and 24 hours respectively. In the presence of lightening layers of insulation or in the case of screeds installed directly on the ground a vapour barrier must be installed to avoid rising damp old floors in ceramic marble etc must be carefully cleaned and degreased before bonding. The adhesive may only be applied once the surface is dry. Wooden floors - make sure wooden floorboards are rigidly fixed to the substrate remove old paint or wax with sandpaper.

Recommended Systems
Spread the adhesive on the substrate using a Mapei notched trowel for wood. Wood has to be laid within approximately 50-60 minutes under normal temperature conditions (at +23°C and 50% R.H.). If leftover adhesive from previous applications is to be used, open the drum, remove the skin formed on the surface of the adhesive and proceed as above. The layer of skin helps to preserve the leftover adhesive.

15-18m² per 15kg

Technical Characteristics
Ultrabond Eco S955 1K is a one component sililated polymer based adhesive without water solvents amines isocyanates and epoxy resin with an extremely low emission level of volatile organic compounds (EMICODE EC1 R plus) it is manufactured accordingly to a technology developed in MAPEI's own laboratories and has the following characteristics one component ready to use product no catalyser is required therefore quantities of the product may be used again at a late date suitable for use by installers who are allergic to epoxy and epoxy polyurethane products GEV certified as a product with a very low emission level of volatile organic compounds (EMICODE EC1 R Plus) no hazard risks and risk and danger symbols easy to apply with excellent ridge holding 20 30 % more yield compared with compared two component adhesives thanks to its low viscosity and free flowing properties when applied by trowel totally free of solvent s and isocyanates easy to remove from hands and pre finished elements.
Weight 15Kg
Unit Of Sale Each
Size 15Kg
Barcode 8022452044892
EDP code 74315
Brand Mapei

Product Attachments

View FileUltrabond ECO S955 Single Component Flooring Adhesive    Size: (686.72 KB) Technical Data Sheet
View FileUltrabond ECO S955 Single Component Flooring Adhesive    Size: (686.72 KB) Safety Data Sheet

You must be logged in to post a question.

No comments just yet - be the first!

Product Reviews

Number of reviews : 2
Average rating : 5 /5
H. Matthew
  the 15/05/2015
5/ 5
Good product and works really well but expensive!
B. 'Julie'
  the 14/02/2014
5/ 5
Great product!

There are no products matching the selection.

There are no products matching the selection.

Post your comment

Builder Depot