Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Thompsons One Coat Damp Seal 750ml

Status : In stock

Delivery : Standard help

SKU : L015259
Inc VAT: £19.14
OR

Quick Overview

A high performance interior seal made to form a breathable, obliterating membrane that seals and prevents reappearance of damp, water and other household stains. Suitable for application to dry and damp walls and ceilings.

For assistance, please call:

020 8362 8100

Drag image to spin
360 Thompsons One Coat Damp Seal 750ml
Thompson's One Coat Damp Seal is a high performance interior seal developed to form a breathable, obliterating membrane that seals and permanently stops the reappearance of damp, water and other household stains. Suitable for application to both dry and damp walls and ceilings the micro-porous formulation allows trapped moisture to evaporate to prevent paint flaking or wallpaper peeling off. Full coverage can be achieved in just one coat, ensuring the surface is prepared for decoration in as little as 4 hours.

Usage Areas
Suitable for use on interior walls or ceilings, including plaster, cement and stone

Coverage
Up to 5m²/L depending on the porosity of the substrate.

Dry Times
Allow 4 hours before painting or wallpapering over. Time is extended in cold conditions.

Preperation
For maximum adhesion of the coating ensure all surfaces are clean and free from dust and any loose material. Mask any polystyrene or plastic surfaces before treatment. Although Thompson's One Coat Damp Seal will adhere to damp surfaces, ensure the surface to be treated is not saturated and the source of the damp has been rectified. Remove surrounding wallpaper and any loose paint. If mould is present treat with a proprietary fungicidal wash. Repair any holes, cracks and surface imperfections, and sand down any rough areas.

Application
Thompson's One Coat Damp Seal can be applied using a brush. Do not thin the product as this will affect performance. Apply liberally working well over the affected region and surrounding area (approximately 30cm beyond the affected area). Avoiding any runs and drips.
Unit Of Sale Each
Size 750ml
Barcode 5010214845781
EDP code 34578
Brand Thompsons

Product Attachments

View FileThompsons One Coat Damp Seal    Size: (92.55 KB) Product Data Sheet

You must be logged in to post a question.

No comments just yet - be the first!

There are no products matching the selection.