Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Thompsons 10 Year Roof Seal 2.5L Black

Status : In stock

Delivery : Standard help

SKU : L048919
Inc VAT: £20.34
OR

Quick Overview

Thompson's 10 Year Roof Seal provides an elastomeric coating which when cured forms a durable flexible membrane. Suitable for use on felt, asphalt, slate, tiles, concrete, brick, corrugated metal and wood.

For assistance, please call:

020 8362 8100

Thompsons 10 Year Roof Seal 2.5L Black
Move your mouse over image or click to enlarge
Thompson's 10 Year Roof Seal is a high performance elastomeric coating that cures forming a durable, flexible membrane. Suitable for resealing and protecting whole roofs or large repairs to a range of roofing materials. Designed to flex with the natural movement of the roof allowing protection from membrane cracking and splitting over time.

Key Features
  • 10 Year elastomeric coating
  • UV light stable
  • Repairs and weatherproofs roofs
  • Allows trapped moisture to escape
  • Use over existing roof coatings

Preparation
For maximum performance, remove dust, dirt and any loose chippings and flaking material. Neutralise any rusty corrugated metal with a proprietary rust treatment and treat any fungal growth with fungicide, following manufacturer's instructions and wash off thoroughly. Repair any structural faults. Use Thompson's 10 Year Roof Seal to fill any cracks and level any depressions where ponding could occur. Where major joint movement may occur embed a reinforcing scrim bandage into the first coat of Thompson's 10 Year Roof Seal before applying a second coat. Old felt blisters should be cut open and any retained moisture allowed to dry before securing the felt with tacks.

Application
Thompson's 10 Year Roof Seal can be applied by brush, roller or a soft broom. Brush out a coat of Thompson's 10 Year Roof Seal. Allow the first coat to dry for 6 hours then apply the second coat for long lasting protection. Thompson's 10 Year Roof Seal requires no primer, however in very dusty, dirty or porous areas or areas likely to pond a diluted first coat should be applied - two parts Thompson's 10 Year Roof Seal to one part water. Allow to dry before applying two further coats of Thompson's 10 Year Roof Seal. Brush out a coat of Thompson's 10 Year Roof Seal allowing the first coat to dry for 6 hours then apply the second coat for long lasting protection.

Clean Up
Clean brushes, rollers and other equipment immediately after use with detergent and warm water. Remove as much product as possible from application equipment before cleaning.
Weight 3.45Kg
Unit Of Sale Each
Colour Black
Size 2.5L
Barcode 5010214801442
EDP code 30144
Brand Thompsons

You must be logged in to post a question.

No comments just yet - be the first!

There are no products matching the selection.

There are no products matching the selection.

Post your comment

Builder Depot