Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

KA Tanking Slurry

Status : In stock

Delivery : Big and Bulky help

SKU : L037063
Inc VAT: £29.94
OR

Quick Overview

The KA Tanking Slurry waterproofing system provides a solution to water leakage, ingress or seepage in concrete structures or any cementitious substrate. The formation and development of insoluble crystals into water bearing capillaries and fissures effectively blocks the further passage of water and ensures permanent water tightness for the life of the structure.

Coverage rate of 7-8m²/bucket for the 2 coat application (up to 16m² per coat, per bucket)

For assistance, please call:

020 8362 8100

KA Tanking Slurry
Move your mouse over image or click to enlarge
The KA Tanking Slurry waterproofing system provides a solution to water leakage, ingress or seepage in concrete structures or any cementitious substrate. The formation and development of insoluble crystals into water bearing capillaries and fissures effectively blocks the further passage of water and ensures permanent water tightness for the life of the structure. KA tanking Slurry can be applied to new or old structurally sound surfaces. It can be applied either to the negative or the positive side and will negate dampness in ground water permeation even under hydrostatic pressure.

Key Features
  • Solution to water Leakage
  • Can be applied externally & internally
  • Can be used new or old structurally sound surfaces
  • supplied in powder form in 25Kg plastic tubs

Application
On site KA tanking slurry is mixed with water to form a smooth paste. The paste is applied directly to concrete or masonry structures and penetrates a short distance into capillary cracks, fissures and pores in the surface of the concrete. The presence of water and free lime causes the tanking slurry to form insoluble crystals which block the pores and prevent passage of water. This effectively makes the concrete water tight for the lifetime of the structure. KA Tanking Slurry can be applied by brush or spray to new or old structurally sound surfaces, without a bonding coat, either to the internal or the external side. It can be applied to both horizontal and vertical surfaces. Surfaces should be prepared to have a capillary open structure. The waterproofing barrier should run continuously around the whole structure. The product is for use where the basement is above the level of the water table. KA Tanking Slurry can be used for the three grades of protection of basements Grade I for car parking, Grade 2 for plant rooms, workshops and garages, Grade 3 for residential and commercial areas KA Tanking Slurry has passed the tests of VVRAS Water Regulations Advisory Scheme, B56920 and is approved for drinking water structures such as reservoirs and concrete drinking water tanks. It can also be used in swimming pools, retaining walls, tunnels and lift shafts.
Unit Of Sale Each
Barcode N/A
EDP code KATS25G
Brand KENYON

You must be logged in to post a question.

No comments just yet - be the first!

Product Reviews

Number of reviews : 1
Average rating : 5 /5
S. Istvan
  the 01/07/2016
5/ 5
Good price , great product

There are no products matching the selection.

There are no products matching the selection.