Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Safety Valve Gauge 1/2''

Status : In stock

Delivery : Standard help

SKU : P000746
Inc VAT: £14.11

Quick Overview

Ideal for closed circuit water heating systems this pressure relief valve comes with a gauge and is pre-set to 3Bar pressure.

For assistance, please call:

020 8362 8100

Safety Valve Gauge 1/2''
Move your mouse over image or click to enlarge
The pressure relief valve is predominately used to protect closed circuit water heating systems from overpressure. It has a high grade reinforced plastic twist cap, supplied with gauge.

The valve must be placed vertically, as close as possible to the heat generator, it must be visible and easily accessible. No valves should be placed between generator and safety valve. Always respect the direction of flow and the outlet should be connected to the draining pipe.
Dimension of inlet and draining pipe must be the same as the nominal diameter of the valve. Discharge must be done in the open air without any circuit accident. After installation make the safety valve blow by turning the red knob clockwise so that it rises and consequently opens the valves. When the knob is in the down position the valve is closed.

It is advised to operate the valve at least once a year, to do this use the same method as above several times in a row.

Size : ½''.
Set Pressure : 3 Bar.
Finish Brass
Size 1/2''
Unit Of Sale Each
Brand Westco
Barcode 3430650024366
EDP code 29040

You must be logged in to post a question.

No comments just yet - be the first!

There are no products matching the selection.

Post your comment

Builder Depot