Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Ronseal Quick Drying Woodstain 2.5L Natural Pine

Status : In stock

Delivery : Standard help

SKU : L048894
Inc VAT: £39.54

Quick Overview

Ronseal Quick Drying Wood stain is UV resistant to prevent colour fade, highly water repellent and rainproof in only 30 minutes.

For assistance, please call:

020 8362 8100

Ronseal Quick Drying Woodstain 2.5L Natural Pine
Move your mouse over image or click to enlarge
360 Ronseal Quick Drying Woodstain 2.5L Natural Pine
Ronseal Quick Drying Wood stain is the ultimate all in one 'stain and finish', which provides an attractive long lasting finish. It not only enhances the natural beauty of the wood, but also protects it from water damage and the sun's harmful ultra-violet rays. Quick Drying Wood stain is all that is required to protect and decorate exterior wood. It is long lasting, not only beautifying but waterproofing and protecting your wood. Unlike ordinary wood stains with Ronseal Quick Drying Wood stain you can now complete your exterior projects in less than a day. It is extremely easy to apply, it is touch dry in 30 minutes and can be recoated in 4 hours

Key Features
  • Rainproof in only 30 minutes
  • Highly water repellent
  • Resists cracking, peeling and blistering
  • UV resistant to prevent colour fade

Surface Preparation
Make sure wood is clean and dry. Lightly sand to remove any loose wood fibres and wipe off any dirt, dust and grease with white spirit. Previously stained or weathered wood should be thoroughly sanded, then washed with white spirit and allowed to dry. Avoid inhalation of dust, wear a suitable face mask when sanding. Other finishes such as varnish or paint must be completely removed before application. For the best possible finish use a good quality brush designed for the application of water-based finishes. Shade label indicates approximate colour only. Always test for colour on a small inconspicuous area.

Recommended Systems
Stir well before and during use. Apply even coats finishing in the direction of the wood grain. Apply 3 coats allowing 4 hours between coats. Lightly sand before final coat. In warm and dry conditions, for best results dilute the first coat with up to 25% water. Do not apply in direct sunlight. Weathered wood may reduce coverage rate. Coverage varies with the absorbency of the wood. Remove as much product as possible from application equipment before cleaning. Clean brushes immediately with detergent and water. Do not empty product into drains or watercourses. Some local authorities have special facilities for disposal of waste coatings.
Weight 2.96Kg
Unit Of Sale Each
Colour Pine
Drying Time Rain Proof In 30 Minutes
Size 2.5L
Barcode 5010214849710
EDP code 34971
Brand Ronseal

You must be logged in to post a question.

No comments just yet - be the first!

There are no products matching the selection.

There are no products matching the selection.

Post your comment

Builder Depot