Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Ronseal Diamond Hard Floor Wax 2.5L Natural

Status : In stock

Delivery : Standard help

SKU : L040960
Inc VAT: £46.68

For assistance, please call:

020 8362 8100

Drag image to spin
360 Ronseal Diamond Hard Floor Wax 2.5L Natural
Ronseal Diamond Hard Floor Wax is ideal for use on wooden floors in high traffic areas and areas where it may eventually come into contact with water such as kitchens and bathrooms. It produces a beautiful, subtle natural matt wax finish, that allows the grain to show through. For best results, and a true representation of colour, use on bare wood.

Key Features
  • Our toughest formulation
  • Resist knocks, scratches and scuffs
  • Quick Dry varnish
  • Quick drying - touch dry in just 30 minutes

Surface Preparation
Varnished Floors : Thoroughly sand with 120 grade abrasive paper to provide a key for the wax to adhere to. Wipe over with white spirit to remove dust and allow to dry. Varnish in poor condition should be completely removed.
Unvarnished Floors : All existing coatings must be removed and the surface sanded back to a smooth finish. The quickest option is to hire a sanding machine from a tool hire shop. Follow the hire instructions, always test sanding, remembering to sand along the grain. Use a small electric sander or sand by hand to finish off around edges. Do not use an abrasive paper finer than 120 grade. Fill any holes or surface imperfections with Ronseal Multi Purpose Wood filler. Allow dust to settle then vacuum. Wipe over with white spirit and allow to dry thoroughly. Avoid the inhalation of dust, wear a suitable face mask when sanding.

Recommended Systems
Stir thoroughly before and during use. Apply in a warm well ventilated room. Using a wide brush apply the wax evenly and finish in the direction of the wood grain. For best results apply to 3 - 4 floor boards at a time to avoid overlaps. Apply 3 coats leaving 2 hours between coats. Do not over-brush as this will spread the finish too thinly and affect performance. Before the final coat, lightly rub down with 240 grade abrasive paper and wipe over with a damp cloth then allow to dry. Do not use wire wool. The floor is ready to walk on after 8 hours but allow 72 hours before subjecting to heavy foot traffic.
Colour Natural
Size 2.5L
Unit Of Sale Each
Weight 2.9kg
Brand Ronseal
Barcode 5010214849604
EDP code 34960
Drying Time Touch Dry In 30 Minutes

You must be logged in to post a question.

No comments just yet - be the first!

There are no products matching the selection.

There are no products matching the selection.

Post your comment

Builder Depot