Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Ronseal Diamond Hard Floor Varnish 2.5L Satin Medium Oak

Status : In stock

Delivery : Standard help

SKU : L015218
Inc VAT: £47.40
OR

Speak to our Flooring Experts:

020 8362 8145

Drag image to spin
360 Ronseal Diamond Hard Floor Varnish 2.5L Satin Medium Oak
Ronseal Diamond Hard Floor Varnish is ideal for use on most wooden floors including those in kitchens and bathrooms and is particularly suited for areas of the highest foot traffic. Suitable for use over most hard and soft woods, as well as hardboard, chipboard and wood composite. Diamond Hard Coloured Floor Varnish is available in a range of natural wood colours in an attractive satin finish which allows the beauty of the wood to show through whilst adding depth of colour to your flooring. If you wish to varnish your floor but without adding colour, use Ronseal Diamond Hard Clear Floor Varnish.

Key Features
  • The toughest Diamond Hard formulation
  • Diamond Hard Protection against knocks, scratches and scuffs
  • Quick drying - touch dry in just 30 minutes

Surface Preparation
Varnished Floors : Thoroughly sand with 120 grade abrasive paper to provide a key for the varnish to adhere to. Wipe over with white spirit to remove dust and allow to dry. Varnish in poor condition should be completely removed.
Unvarnished Floors : All existing coatings must be removed and the surface sanded back to a smooth finish. The quickest option is to hire a sanding machine from a tool hire shop. Follow the hire instructions, always test sanding, remembering to sand along the grain. Use a small electric sander or sand by hand to finish off around edges. Do not use an abrasive paper finer than 120 grade. Fill any holes or surface imperfections with Ronseal Multi Purpose Wood Filler. Allow dust to settle then vacuum. Wipe over with white spirit and allow to dry thoroughly. Avoid inhalation of dust, wear a suitable face mask when sanding.

Recommended Systems
Stir thoroughly before and during use. Apply in a warm, well ventilated room. Using a wide brush apply the varnish evenly and finish in the direction of the wood grain. For best results apply to 3 - 4 floor boards at a time to avoid overlaps. Apply a minimum of 3 coats leaving 2 hours between coats. Do not over-brush as this will spread the finish too thinly and affect performance. Before the final coat, lightly rub down with 240 grade abrasive paper and wipe over with a damp cloth then allow to dry. Do not use wire wool. The floor is ready to walk on after 8 hours but allow 72 hours before subjecting to heavy foot traffic.
Weight 2.830Kg
Unit Of Sale Each
Drying Time Touch Dry In 30 Minutes
Size 2.5L
Barcode 5010214834266
EDP code 33426
Brand Ronseal

Product Attachments

View FileRonseal Diamond Hard Floor Varnish    Size: (209.86 KB) Product Info

You must be logged in to post a question.

No comments just yet - be the first!

There are no products matching the selection.

Post your comment

Builder Depot