Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Ronseal Decking Stain 2.5L Rustic Pine

Status : In stock

Delivery : Standard help

SKU : L040925
Inc VAT: £23.50

Quick Overview

Ronseal Decking Stain protects decking against knocks, scuffs and scratches and provides a rich depth of colour. Ronseal Decking Stain is touch dry and rainproof in 90 minutes.

For assistance, please call:

020 8362 8100

Drag image to spin
360 Ronseal Decking Stain 2.5L Rustic Pine
Ronseal Decking Stain provides a rich depth of colour, protects your deck against weathering and foot traffic and is rainproof in just 90 minutes. Our tough and durable formula waterproofs to resist cracking, peeling and blistering, while added UV protection resists colour fade.

Key Features
  • UV filters prevent greying and maintain colour for longer
  • Protects decking against knocks, scuffs and scratches
  • Waterproofs resisting cracking, peeling and blistering
  • Touch dry in 90 mins

Surface Preparation
Old decking: Use Ronseal Decking Cleaner and Reviver to remove any dust, grease, oil, mildew, algae and other contaminants. Remove any loose, flaking or peeling coatings. For best results and to avoid patchiness remove all previous coatings. Ensure the ends are adequately protected using Ronseal Decking End Grain Preserver. New wood: New decking timber should be allowed to weather naturally (usually 6 months) to ensure any pre-treatment has sufficiently eroded, allowing penetration and adhesion of the stain. Clean the decking with Ronseal Decking Cleaner and Reviver, using a scrubbing brush to open the pores of the wood and remove any contamination from the manufacture of the decking. Then rinse thoroughly with clean water, ideally using a pressure washer and allow to dry completely before overcoating. Test effectiveness of cleaning by splashing the deck with water, if beading occurs, re-clean. Retest prior to applying Perfect Finish Decking Stain. The shade label indicates approximate colour only. We recommend you test a small area to determine the final colour which may be influenced by the texture, grain, colour, porosity, type of wood and previous treatment.

Recommended Systems
1. Ensure decking is thoroughly dry. Do not apply in damp conditions or when rain is likely before product has dried. Do not apply below 10°C. 2. Remove the overlap and assemble the pad. Remove the lid, which can be used as a tray if desired. If using the lid, wash with water and detergent and dry using a clean soft cloth. Stir the stain thoroughly and then pour approximately 1 to 1.5cm into the tray. Do not dilute. 3. Dip the pad into the stain, ensuring the underside of the pad is immersed. Dip the pad evenly taking care not to overload it. 4. Starting in the furthest corner, push or pull the pad in the direction of the wood grain. The pad will hold more product than a brush so you will be able to apply in long, smooth stokes. The pad allows you to work away excess stain and redistribute it evenly along the decking board, avoiding puddles in the grooves. 5. When applying to deck boards, treat 3 - 4 boards at a time to avoid overlap marks. 6. We recommend 2 coats, however, to achieve a deeper colour you can apply a third coat. For maximum protection apply to all sides and ends of the decking.
Size 2.5L
Unit Of Sale Each
Weight 2.8kg
Brand Ronseal
Barcode 5010214834112
EDP code 33411
Drying Time Rain Proof In 90 Minutes

Product Attachments

View FileRonseal Decking Stain    Size: (111.99 KB) Product Data Sheet

You must be logged in to post a question.

No comments just yet - be the first!

There are no products matching the selection.

Post your comment

Builder Depot