Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Rockwool Insulation TD Cavity 100mm X 455mm X 1200mm Pk 6

Status : In stock

Delivery : Big and Bulky help

SKU : H003134
Inc VAT: £15.11

For assistance, please call:

020 8362 8100

Rockwool Insulation TD Cavity 100mm X 455mm X 1200mm Pk 6
Move your mouse over image or click to enlarge
Rockwool Cavity full fill insulation is reliable, non-combustible and contains water repellent additives that prevent water from passing through to the inner leaf of new build external masonry cavity walls. The lightweight batts are produced from highly sustainable volcanic rock, helping to keep the planet healthy, occupants warm and energy bills low.

Key Features
  • BBA certified for all exposure zones
  • Acts as a cavity barrier
  • Water repellent
  • Outstanding thermal and fire insulation
  • Superior fit against block work

Rockwool Cavity has been examined by the British Board of Agreement (BBA) and granted Certificate 94/3079 for use in all exposure zones for buildings that are up to 12m in height, as well as for buildings that are over 12m, and up to 25m, in height in zones where the exposure factor does not exceed 120. To comply with the requirements of the BBA Certificate, and ensure trouble free performance, masonry walls must be built in accordance with BS EN 1996-1-2-3 and workmanship on site must comply with BS 8000: Part 3: 1989. Rockwool Cavity conforms to BS EN 13162:2008 Specification for factory-made mineral wool products.
Approved Doc 'B' (E+W) Technical Booklet E (NI). Building Standards Section 2 (Scotland). Resistance to fire spread between and within cavities. Rockwool Cavity is non-combustible and therefore suitable for use in buildings of every purpose group. It also acts as an effective cavity barrier when tightly fitted between masonry leaves where an insulated wall connects with an un-insulated wall cavity. Fire classification Rockwool Cavity achieves a reaction to fire classification of A1 as defined in EN 13501-1.
Approved Doc 'C' (E+W) Technical Booklet C (NI) . Building Standards Section 3 (Scotland). Rockwool Cavity does not absorb water by capillary action and may therefore be used in situations where they bridge the damp proof course. (See Section 8.1 of the BBA certificate). The orientation of the water repellent fibres prevent water crossing the wall construction provided that the batts are correctly installed and sound building techniques are applied to the cavity wall construction (see installation notes). Any water penetrating the outer leaf will drain down the surface of the batts.
Rockwool Cavity has a thermal conductivity (K value) of 0.037W/mK. Approved Document L (2010 edition) U-value. Requirements"
Unit Of Sale Each
Size 100mm X 455mm X 1200mm
EDP code TDCAV100/450
Brand Rockwool
Pack 3.28M2/Pack

Product Attachments

View FileRockwool Insulation TD Cavity    Size: (289.58 KB) Product Data Sheet

You must be logged in to post a question.

No comments just yet - be the first!

Product Reviews

Number of reviews : 2
Average rating : 4.5 /5
S. Denis
  the 02/08/2016
5/ 5
very good
  the 06/07/2016
4/ 5
Good product.
Post your comment

Builder Depot