Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Mapeproof 1K Turbo 10Kg For Waterproofing Or Consolidating Screeds

Status : In stock

Delivery : Standard help

SKU : L039832
Inc VAT: £157.50

Quick Overview

Mapei Mapeproof Turbo, solvent free single component, rapid drying damp proof membrane, no mixing required and no wastage. Suitable for single and two-coat applications depending on RH values.

Speak to our Flooring Experts:

020 8362 8145

Mapeproof 1K Turbo 10Kg For Waterproofing Or Consolidating Screeds
Move your mouse over image or click to enlarge
360 Mapeproof 1K Turbo 10Kg For Waterproofing Or Consolidating Screeds
Mapeproof 1K Turbo is a single component, solvent-free, rapid-curing polyurethane surface damp proof membrane. Moisture curing with very low emissions of VOC for controlling residual or static moisture in cementitious sub floors. No mixing and no waste. For single and two-coat applications dependent on %rh values. MAPEPROOF 1K TURBO can be primed or overlaid in under 1 hour subject to temperature conditions. Can be used for consolidating weak and crumbling screeds.

Key Features
  • Rapid drying
  • Consolidates screeds
  • EC1R Very low emissions of VOC

Surface Preparation
If applying Mapeproof 1K Turbo to a power floated concrete slab, it must be mechanically prepared by shot blasting or diamond grinding to remove the surface and expose the pores to ensure the product is allowed to penetrate the surface of the sub floor. The sub floor must be clean, sound and free from laitance, oil, water, wax, dust, curing agents, and any form of contamination. New screed should be allowed to cure for a period of more than 28 days prior to being tested as per BS8203 to establish the residual moisture content, rapid drying screeds must be cured according to the manufacturer's instructions for each particular product. Cracks and surface crazing must be opened, cleaned and then repaired with Eporip.

Recommended Systems
Apply Mapeproof 1K Turbo with a roller, brush or flat trowel. For highly porous substrates, or substrates in poor condition, a second layer should be applied (at right angles to the 1st) when the first coat is suitable to accept light foot traffic with no transfer. Where the substrate is profiled or uneven, it can be pre-smoothed with a minimum 3mm Mapei Latexplan. Mapeproof 1K Turbo should be applied ensuring that it is well worked in to the substrate so that complete coverage and a pin-hole free coating is achieved without excessive product lying on the surface.

0.2 - 0.4kg/m² per coat, depending on the absorption of the surface. 30m² per 10kg Unit per coat.

Technical Characteristics
Mapeproof 1K Turbo is a single component, solvent-free, moisture curing and rapid drying polyurethane surface membrane which hardens due to the humidity present in the surrounding air and in the sub floor. It quickly loses its tackiness and with its rapid set to foot traffic allows the primer levelling compound to be laid in a very short time scale. Mapeproof 1K Turbo does not contain solvents and has a very low emission level of volatile organic compounds (EMICODE EC1 R) is odourless and non-flammable. Because of the total absence of solvents and very low odour it can be used in inhabited environments (e.g. Hospitals, Schools, and Offices etc). After application and the rapid reticulation of the resin, substrates treated with Mapeproof 1K Turbo become more consistent, harder and resistant to abrasion.
Weight 10Kg
Unit Of Sale Each
Size 10Kg
Barcode 8022452052842
EDP code 233210M
Brand Mapei

Product Attachments

View FileMapeproof Turbo For Waterproofing Or Consolidating Screeds    Size: (436.17 KB) Technical Data Sheet

You must be logged in to post a question.

No comments just yet - be the first!

There are no products matching the selection.

There are no products matching the selection.

Post your comment

Builder Depot