Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Mapelastic Smart 2 Part Waterproofer 20Kg Powder A 10Kg Liquid B

Status : In stock

Delivery : Free delivery help

  • Buy 3 for £106.32 each and save 8%
  • Buy 6 for £100.56 each and save 13%
SKU : L010939
Inc VAT: £114.90

Quick Overview

Mapei Mapelastic is a quick drying, one-part flexible, waterproof membrane suitable for internal and external use in showers, wet rooms and balconies. Ideal for screed, render, concrete, plywood and ceramic finishes.

For assistance, please call:

020 8362 8100

Drag image to spin
360 Mapelastic Smart 2 Part Waterproofer 20Kg Powder A 10Kg Liquid B
Mapelastic is a highy flexible 2 component liquid appied waterproofing membrane it can be used to waterproof terraces, swimming pools, foundations , retaining walls etc.

Key Features
  • Easy to apply by brush, roller or spray
  • Highly flexible
  • Provides a fantastic key to tile onto
  • Thin coat at only 2mm

Surface Preperation
A) Protection and waterproofing of concrete elements and structures. The surface to be treated must be sound and clean. Remove all cement laitance, flaking parts and traces of powder, grease, oil and removing compounds by sand blasting or high pressure washer. If the structure is in a poor condition, remove the damaged parts (to avoid damage to reinforcing rods or cracks due to vibration, water jet blasting is recommended). Once rest has been removed by sand-blasting repair with MAPEI Mapegrout products. Absorbent surfaces should be dampened prior to the application of Mapelastic Smart.
B) Waterproofing balconies, terraces and swimming pools
  • Cementitious screeds, settlement cracks and leveling should be addressed beforehand.
  • Existing floors, these should be well bonded and free from contamination.
  • Renders new, cementitious renders or lime-based renders should be well cured (in good weather 7 days per cm thickness), adherent to the substrate, resistant and free from contamination.

Recommended Systems
Pour component B in to a suitable clean container. Slowly add component A while stirring with a mechanical mixer. Carefully mix Mapelastic Smart for a few minutes, ensuring no powder remains on the sides or bottom of container. Stir until a homogeneous mix is obtained. Use a low speed mechanical mixer, do not prepare by hand. May also be prepared in a mortar mixer, ensure no lumps remain before pouring into pump. Mapelastic Smart must be applied in at least two coats within 60 mins of being mixed, to give a final coat of min. 2cm. Mapelastic Smart can be re-inforced with Mapenet 150, used for crack-bridging with Mapetex Sel and enhanced with the use of Mapeband. After applying Mapelastic Smart, wait at least 5 days for curing (in favourable climatic conditions e.g. 20°C) before laying ceramic tiles. Time is lengthened in colder climate.

Application by brush or roller 1.6kg/m² per mm thickness; Spray gun application 2.2kg/m² per mm thickness.

Technical Characteristics
Mapelastic Smart is a two-component mortar based on cementitious binders, fine grained selected aggregates, special additives and synthetic polymers in water dispersion, blended according to a formula developed by MAPEI. When the two components are mixed a blend with a plastic consistency is obtained. It may be applied by brush, roller or spray machine on horizontal or vertical surfaces at a thickness of approx. 2 mm. The hardened layer remains constantly flexible under all environmental conditions. Mapelastic Smart is completely waterproof up to a pressure of 1.5 bar and resistant to the penetration of aggressive substances in the atmosphere, seawater or in the ground. Mapelastic Smart has excellent bonding properties on all cementitious, ceramic, marble surfaces that are sound and sufficiently clean. This property, and resistance to UV rays ensures structures protected with the product have a long service life.
Unit Of Sale Each
Weight 20Kg/10Kg
Brand Mapei
Barcode N/A
EDP code A-167720 B-16871

Product Attachments

View FileMapelastic Smart 2 Part Waterproofer    Size: (524.79 KB) Technical Data Sheet
View FileMapelastic Smart 2 Part Waterproofer    Size: (80.76 KB) Safety Data Sheet Part A
View FileMapelastic Smart 2 Part Waterproofer    Size: (35.28 KB) Safety Data Sheet Part B

You must be logged in to post a question.

No comments just yet - be the first!

There are no products matching the selection.

There are no products matching the selection.

Post your comment

Builder Depot