Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Mapei 1kg Primer G

Status : In stock

Delivery : Standard help

SKU : L037320
Inc VAT: £7.50

Quick Overview

Mapei Primer G is a resin primer suitable for use on absorbent substrates such as plasterboard or plywood prior to tiling, Application is quick and easy using a brush or roller.

For assistance, please call:

020 8362 8100

Mapei 1kg Primer G
Move your mouse over image or click to enlarge
Mapei Primer G is a water-based synthetic resin primer for treating gypsum or anhydrite substrates prior to installing ceramic tiles or stone material with cementitious adhesives. Primer G has very low emissions of VOC. For general dust suppression and reducing the absorption of very porous substrates. Suitable for use on absorbent substrates only e.g. screed, plasterboard, plywood.

Key Features
  • Easy to apply with brush or roller
  • Very low VOC
  • Water based
  • Drying time 2 hours

Surface Preparation
The substrate must be clean, dry and free from oils, grease, laitance, residual paint and other loose material. In each case, the manufacturer's recommendations for gypsum-plaster must be followed, particularly as far as moisture content and level of surface finishing are concerned. Cracks in concrete surfaces must be repaired with Eporip or Epojet. Anhydrite surfaces must be mechanically abraded.

Recommended Systems
As a treatment for ceramic tiles installed on gypsum: Stir the Primer G just before use, spread it uniformly on the surface with a flat brush without diluting it. If the gypsum plaster surface is especially smooth and glossy, it is recommended to abrade it beforehand. Once it has dried fix the tiles.
As an anchoring coat for gypsum plasters: Dilute Primer G 1:2 with water and stir well; spread the mix on the surface with a flat brush or spray pump. Apply the sprayable gypsum as soon as Primer G is dry.
As a primer before applying self-leveling compounds and thixotropic smoothing compounds from the MAPEI range on: cementitious substrates: dilute Primer G 1:1 or 1:3 with water (depending on the absorption of the substrate); ceramic, marble and non absorbent substrates: dilute Primer G 1:1 with water; gypsum based substrate: use Primer G neat. As a primer for wallpaper adhesives: dilute Primer G 1:3 with water.
As a primer between smoothing layers: dilute Primer G 1:3 with water.

The consumption of Primer G depends on the porosity and absorption of the surface. Normal consumption is between 0.1 and 0.2kg/m².

Technical Characteristics
Primer G is a water dispersion of special synthetic resins which, once applied to any surface, dry to form a flexible, compact, shiny coating which consolidates the surface, where needed. Primer G also improves the adhesion of smoothing compounds, paint, adhesive for wall paper, adhesive for tiles and mortar for renders. The film of Primer G on the surface of gypsum or cement, prevents any chemical reaction between sulphates and the cement alluminates of the tile adhesive which, in the presence of moisture, leads to the formation of the salt ''ettringite'' which is the cause of tiles breaking away from gypsum substrates. Primer G makes wallpaper stripping far easier and decreases the amount of glue used for paperhanging. When used before applying sprayable plasters, Primer G prevents over-rapid absorption of water by the substrate, prolongs finishing time and helps prevent shrinkage cracks. When used before the application of self-levelling compounds, Primer G reduces the formation of air bubbles and helps prevent over-rapid drying making self-levelling easier. Primer G is not inflammable and can therefore also be used in closed, unventilated environments without any precautions having to be taken.
Weight 1Kg
Unit Of Sale Each
Size 1Kg
Barcode 8022452053979
EDP code 20101
Brand Mapei

Product Attachments

View FileMapei Primer G    Size: (203.74 KB) Technical Data Sheet
View FileMapei Primer G    Size: (36.12 KB) Safety Data Sheet

You must be logged in to post a question.

No comments just yet - be the first!

Product Reviews

Number of reviews : 1
Average rating : 5 /5
M. Steven
  the 23/07/2016
5/ 5
perfect for tiling plasterboard wall
D. Sam
  the 03/04/2015
5/ 5
Great product

There are no products matching the selection.

There are no products matching the selection.

Post your comment

Builder Depot