Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Mapei 1.5Kg Waterproof Fix & Grout White

Status : In stock

Delivery : Standard help

  • Buy 3 for £8.04 each and save 7%
  • Buy 6 for £7.56 each and save 13%
SKU : L021254
Inc VAT: £8.64

Quick Overview

Mapei Waterproof Fix & Grout suitable for ceramic and porcelain tiles, ideal for splash backs and small tiled areas.

For assistance, please call:

020 8362 8100

Drag image to spin
360 Mapei 1.5Kg Waterproof Fix & Grout White
Mapei Waterproof Fix and Grout White is a ready mixed adhesive and grout for walls. Mould resistant. For use in dry and wet areas. Suitable for ceramic tiles and porcelain up to 200x200mm.

Key Features
  • Adhesive and grout in 1 tub
  • Ideal for tiling splash backs or small areas

Recommended Systems
Spread the adhesive over no more than 1m² before applying tiles. The open time of the adhesive is approx. 20 minutes depending on the porosity and type of substrate and the temperature of the room. Apply the adhesive using a suitable trowel to ensure at least 65% contact in dry areas and a solid layer of adhesive in wetter areas. Generally a larger size notch will be required for larger format tiles. Do not exceed tile size of 200 x 200mm. Check the coverage by lifting a tile occasionally an inspecting. Apply an additional layer of adhesive to the rear of larger tiles. Clean any residues from the tile face immediately. If a matt finish or rough textured tile is used please be aware that the Waterproof Fix and Grout will dry in the pores of the tile. It is therefore essential to work carefully and to clean the grout off immediately. It is recommended that a trial area be carried out to ensure compatibility between tile and grout. Do not start to grout until the adhesive has dried. This is usually within 24-48 hrs. depending on the tile, the substrate and the temperature. Before commencing grouting ensure that the product is clean and has not become contaminated during the tiling process. Use a MAPEI grout squeegee/rubber float to push the Waterproof Fix and Grout firmly into the tile joints ensuring a full joint is achieved. Strike off as much material as possible from the tile face using the squeegee diagonally to the tile face. Wipe off the remaining excess grout within 5 to 10 minutes using a lightly dampened sponge or a white coloured MAPEI emulsifying pad. Use a circular motion over the tiles but do not over wash the grout during this cleaning process as this may introduce air bubbles or pin holes into the grout surface. Strike the joints with the edge of the sponge to leave a neat finish. Once dried buff up the tiles with a clean, dry cloth.
Colour White
Unit Of Sale Each
Weight 1.5Kg
Brand Mapei
Barcode 8022452054655
EDP code 112326

Product Attachments

View FileMapei Waterproof Fix & Grout    Size: (258.67 KB) Technical Data Sheet

You must be logged in to post a question.

No comments just yet - be the first!

There are no products matching the selection.

There are no products matching the selection.

Post your comment

Builder Depot