Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Leyland Trade Truguard Flexi External Undercoat 2.5L Dark Grey

Status : In stock

Delivery : Standard help

SKU : L016424
Inc VAT: £45.54
OR

Quick Overview

This specially formulated undercoat can be used in unison with Leyland Truguard Flexible Exterior Gloss to ensure for a flexible, durable and water-resisting gloss system for exterior timber and metal.

For assistance, please call:

020 8362 8100

Drag image to spin
360 Leyland Trade Truguard Flexi External Undercoat 2.5L Dark Grey
Leyland Trade Truguard Flexible Undercoat has been specifically formulated to be used in conjunction with Leyland truguard flexible exterior gloss to provide an exceptionally flexible, durable and water-resisting gloss system for exterior timber and metal.

Key Features
  • Flexible
  • Microporous
  • Coverage up to 12m² per litre
  • Suitable for exterior use
  • Solvent-based
  • Suitable for brush and roller application.

Surface Preparation
Ensure surface to be painted is sound, clean, dry and free from grease. Avoid inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.

Bare wood
Ensure the wood has a moisture content of less than 20%. Treat all knots and resinous areas with two thin coats of knotting solution. Apply one coat of preservative to all bear timber paying particular attention to end grain and joints. Fill any surface defects, holes or joints using a two pack wood filler. Apply one coat of Leyland truguard flexible undercoat followed by two coats of flexible exterior gloss.

Bare metal
Remove any rust and corrosion and apply a suitable metal primer. Apply one coat of Leyland trade truguard flexible undercoat followed by two coats of flexible exterior gloss.

Application Method
Brush and roller application.

Recommended Systems
Stir well before use. Do not thin. Allow 16-24 hours drying between coats.

Cleaning Up
Remove as much as the product as possible from application equipment before cleaning. Clean equipment immediately after use with white spirit or turpentine substitute. Do not empty product into drains or watercourses.

EU limit value for this product (Cat A/d) : 400g/l (2007) / 300g/l VOC.
This product contains max 300g/l VOC.
Weight 3.7231kg
Unit Of Sale Each
Colour Dark Grey
Re-Coat Time Re-Coat In 16 Hours
Size 2.5L
Barcode 5010426031774
EDP code 300711
Brand Leyland Paint

Product Attachments

View FileLeyland Trade Truguard Flexi External Undercoat     Size: (108.56 KB) Technical Spec Sheet
View FileLeyland Trade    Size: (116.86 KB) Substrate Guide

You must be logged in to post a question.

No comments just yet - be the first!

There are no products matching the selection.

Post your comment

Builder Depot