Leyland Contract Matt is a high quality emulsion paint, specially formulated to provide a full-bodied, high opacity, matt finish to all interior walls and ceilings making it ideal for new work application. Suitable for interior use on new and aged plaster, wallboards, concrete, cement rendering, block work and brickwork.
Key Features
Surface Preparation
All surfaces to be painted should be clean, dry and free from loose and flaking materials. Prime bare surfaces with the appropriate Leyland Primer. Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960's paint surfaces over wood and metal as they may contain harmful lead.
Application Method
Suitable for brush, roller and spray application.
Recommended Systems
Stir well. Seal absorbent surfaces with a coat of Contract Matt thinned up to 10% with clean water. Do not apply in temperatures below 5°C. If more than one can of a colour is to be used in the same area, intermix before use.
Cleaning Up
Remove as much product as possible from application equipment before washing. Replace lid firmly. Wash equipment immediately after use with warm soapy water. Some local authorities have special facilities for the disposal of waste coatings. Do not empty product into drains or watercourses.
EU limit value for this product (Cat A/a) : 75g/l (2007) / 30g/l VOC.
This product contains max 15g/l VOC.
Key Features
- High opacity
- Suitable for interior use
- Coverage up to 13m2 per litre
- Water-based
- Suitable for brush, roller and spray application.
Surface Preparation
All surfaces to be painted should be clean, dry and free from loose and flaking materials. Prime bare surfaces with the appropriate Leyland Primer. Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960's paint surfaces over wood and metal as they may contain harmful lead.
Application Method
Suitable for brush, roller and spray application.
Recommended Systems
Stir well. Seal absorbent surfaces with a coat of Contract Matt thinned up to 10% with clean water. Do not apply in temperatures below 5°C. If more than one can of a colour is to be used in the same area, intermix before use.
Cleaning Up
Remove as much product as possible from application equipment before washing. Replace lid firmly. Wash equipment immediately after use with warm soapy water. Some local authorities have special facilities for the disposal of waste coatings. Do not empty product into drains or watercourses.
EU limit value for this product (Cat A/a) : 75g/l (2007) / 30g/l VOC.
This product contains max 15g/l VOC.
Colour | Brilliant White |
---|---|
Size | 15L |
Unit Of Sale | Each |
Weight | 20.5035kg |
Brand | Leyland Paint |
Barcode | 5010426714745 |
EDP code | 264563 |
Re-Coat Time | Re-Coat in 2 Hours |
You must be logged in to post a question.
No comments just yet - be the first!
Number of reviews
: 1
Average rating
: 5 /5
W. Errol
the 06/12/2016

Very good