Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Keraflex Maxi 20Kg Cementitious Adhesive White Plus Built In Flex

Status : In stock

Delivery : Free delivery help

  • Buy 5 for £22.86 each and save 8%
  • Buy 10 for £21.60 each and save 13%
SKU : L001918
Inc VAT: £24.66

Quick Overview

Mapei Keraflex Maxi can be used on internal or external surfaces and is ideal for larger porcelain tiles, the easily workable, slip resistant formula hardens even when applied thickly with minimal shrinkage.

For assistance, please call:

020 8362 8100

Drag image to spin
360 Keraflex Maxi 20Kg Cementitious Adhesive White Plus Built In Flex
Mapei Keraflex Maxi S1 is a high performance, deformable cementitious adhesive with extended open time and no vertical slip, for ceramic tiles. Especially suitable for the installation of large-size porcelain tiles and natural stone. It is suitable for interior and exterior bonding, up to 15mm bed depth, of ceramic tiles on uneven substrates and renders, without having to level before hand.

Key Features
  • Low dust
  • Suitable for interior and exterior use
  • Easily workable
  • Slip resistant
  • Accommodates irregularities in substrate and tile
  • Hardens, even when very thickly applied with minimal shrinkage
  • Extended open and adjustability time
  • Classification in compliance with EN 12002

Recommended Systems
Mix Keraflex Maxi S1 with clean water until a smooth, lump-free paste is obtained. Leave to rest approximately 5 minutes and re-stir. Use approximately 5.5 litres of water for every 20 kg of powder. Mixed this way, Keraflex Maxi S1 has a pot life of approximately 8 hours. To achieve good adhesion, spread a thin layer of Keraflex Maxi S1 on the substrate using the straight edge of the trowel. Immediately after, apply the desired thickness of Keraflex Maxi S1 using a suitable notched trowel, depending on the type and size of the tiles. For outdoor ceramic tiling, sizes greater than 300x300 mm, floors must be subject to heavy loads, or when applying in swimming pools and basins filled with water, spread the adhesive on the back of the tile (back-buttering) in order to ensure a complete coverage.
Colour White
Unit Of Sale Each
Weight 20Kg
Brand Mapei
Barcode 8022452028304
EDP code 1202120

Product Attachments

View FileKeraflex Maxi Cementitious Adhesive    Size: (312.79 KB) Technical Data Sheet
View FileKeraflex Maxi Cementitious Adhesive    Size: (70.38 KB) Safety Data Sheet

You must be logged in to post a question.

No comments just yet - be the first!

Product Reviews

Number of reviews : 6
Average rating : 5 /5
T. Adam
  the 27/02/2018
5/ 5
ok well
Y. Robert
  the 29/11/2017
5/ 5
Does what it says
T. Adam
  the 25/07/2017
5/ 5
ok ok
B. Dzmitry
  the 29/01/2017
5/ 5
Very good adhesive for using with stone tiles. It also has a prolonged working time which which is good if you are a bit slow.
B. Dzmitry
  the 14/01/2017
5/ 5
Good adhesive and has a long working life once mixed. So if you are not a quick tiler then this is for you.
B. Robert
  the 17/12/2016
5/ 5
Slow setting but seems to be doing a good job of holding our 600 x 400mm tiles on the wall.

There are no products matching the selection.

There are no products matching the selection.