Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

K Rend 25Kg UF Fibre Base Render Coat

Status : In stock

Delivery : Big and Bulky help

  • Buy 40 for £9.54 each and save 7%
SKU : H002705
Inc VAT: £10.19

Quick Overview

K Rend UF fibre base render coat is designed to be used with block work as a primary base for K Rend finishes. It features high impact resistance and strength and can be applied using a single coat as backing for K Rend finishes.

For assistance, please call:

020 8362 8100

K Rend 25Kg UF Fibre Base Render Coat
Move your mouse over image or click to enlarge
K Rend UF fibre base render coat is a high quality multipurpose base coat with excellent workability, designed to be used over block work as a primary coat for K Rend finishes. K Rend UF base render coat is the same quality as standard UF base coat but with high impact resistance and tensile strength. Scratch coats require only the addition of water and 5 minute mixing time and normally applied in one coat as a backing for K Rend finishes.

Key Features
  • For block work, masonry or stone backgrounds
  • Fibre based
  • Easy application

Machine coverage rate is 1.8Kg/mm thick/sq.m and requires 14-18Kg/ sq.m approximately. Nominal thickness is 8-10mm.
Size 25Kg
Unit Of Sale Each
Weight 25Kg
Brand K Rend
EDP code 57005B

Product Attachments

View FileK Rend UF Fibre Base    Size: (2.53 MB) Product Data Sheet

You must be logged in to post a question.

1 Item(s)

per page

Questions & Answers

  • From peter at 11/04/2013 10:23
    • I need
      40 bags K Rend 25Kg UF Fibre Base Render Coat by tomoorow morning is this possible?

      Is this the correct top coat,K Rend 25Kg Silicone FT Textured White Render Coat? White and fine texture?What amount 40sq/m?

    • The coverage on this is 1.8kg/per mm thick/per m2, and the recommended thickness is 8-10mm, so you would get 1.39m2 coverage per bag. The FT Textured White is the correct top coat if applying by hand, normally it would be put on 10mm thick, and the coverage is approx 1m2 per bag. Once dry, dry enough that you won’t be able to push your thumb into it, but can push your fingernail into it, it is scrapped using a nailable float in a circular movement, taking off approx 2mm of this top coat. The end result is the fine textured finish.

Base on your selection, you may be interested in the following items

Post your comment

Builder Depot