Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Hammerite Metal Paint Direct To Rust Smooth 750ml White

Status : In stock

Delivery : Standard help

SKU : L037009
Inc VAT: £18.60

Quick Overview

A direct-to-rust primer, undercoat and topcoat in one. It may be painted directly onto rusty surfaces and provides a long-lasting protection. Suitable on a variety of exterior metal including gates, railings, drainpipes, guttering and garden furniture.

For assistance, please call:

020 8362 8100

Hammerite Metal Paint Direct To Rust Smooth 750ml White
Move your mouse over image or click to enlarge
360 Hammerite Metal Paint Direct To Rust Smooth 750ml White
Hammerite Direct To Rust Metal Paint Smooth is specially formulated to perform as a primer, undercoat and topcoat in one. It is a durable, corrosion resistant decorative coating for ferrous and non-ferrous metals, certain plastics and wood. This is a brilliant gloss finish which will retain its sheen for years.

Key Features
  • Can be applied directly to rusty metal
  • Coverage 5m²/L
  • No need for primer or undercoat
  • Corrosion resistant
  • Seals out moisture
  • Long lasting protection

Surface Preparation
Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush. Remove dirt, dust and grease with diluted detergent, rinse with clean water and allow to dry. Paint a test patch of Hammerite onto painted surfaces and leave for one hour. If there is no reaction apply Hammerite to surface. If there is a reaction, remove all paint before applying. On bare zinc, aluminium and galvanised surfaces apply a metal primer before applying Hammerite direct to rust paint.

Application Method
Brush or Spray

Recommended Systems
Ideal application temperature 8 - 25°C, lightly stir before use. Do not mix tins or mix colours.
Do not thin, on previously painted metal in sound condition, one coat should be sufficient. On bare / rusty metal two coats are required.
Thin with brush cleaners and thinners at a ratio of 15% thinners to paint. Set spray gun at 25/35psi and use full fan spray at maximum volume. Apply four thin coats, allow one hour between coats. Touch dry in 1 - 2 hours.

Cleaning Up
After use, remove as much paint as possible from brushes before cleaning with brush cleaner and thinners.
Weight 0.932Kg
Unit Of Sale Each
Colour White
Re-Coat Time Re-Coat In 1 - 2 Hours
Size 750ml
Barcode 5011867202167
EDP code 5092956
Brand Hammerite

Product Attachments

View FileHammerite Metal Paint Direct To Rust Smooth     Size: (62.29 KB) Safety Data Sheet

You must be logged in to post a question.

No comments just yet - be the first!

There are no products matching the selection.

Post your comment

Builder Depot