Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Evo-Stik Sanitary Silicone Sealant 310ml Clear

Status : In stock

Delivery : Standard help

SKU : L021197
Inc VAT: £3.30

Quick Overview

High quality moisture curing, acetoxy silicone sealant that cures to form a durable seal. Contains fungicide and is best suited for sealing around sanitary fittings in kitchens and bathrooms.

For assistance, please call:

020 8362 8100

Drag image to spin
360 Evo-Stik Sanitary Silicone Sealant 310ml Clear
Evo-Stik Trade Sanitary Silicone Sealant is a high quality moisture curing, acetoxy type silicone sealant. It contains a fungicide and is ideal for sealing around sanitary fittings in kitchens and bathrooms.

Key Features
  • Highly Waterproof
  • Contains Fungicide
  • Mould resistant
  • Bonds to most surfaces
  • For interior use
  • Lasts Up To 25 Years

Joint surfaces must be clean, dry, sound and free from dust and other contaminants that may impair adhesion. If desired place masking tape along the joint edges before application. This can make it easier to make a neat, tooled finish. Use a spatula with a round end to tool the sealant and check that this tool just fits into the gap between the masking tape so that it catches the excess sealant.

Unscrew the nozzle, and using a sharp knife, cut off the dome of the cartridge, taking care not to damage the thread. Screw the nozzle on to the cartridge. Cut off the tapered end of the nozzle at a 45° angle, to a width matching the gap to be sealed. Fit the cartridge into the cartridge gun by pressing the release plate and pulling out the plunger. Insert cartridge and repeatedly squeeze the trigger until the sealant appears. Place the nozzle at the start of the gap, and gently squeeze the trigger. Push forward slowly, ensuring that contact is made by the sealant with both sides of the gap. At the end of the run, release the trigger and press the plunger release plate of the gun. Smooth the sealant with a wet, round ended tool (do not use a wetted finger), remove any excess with a cloth moistened with white spirit and then remove the masking tape from either side of the bead. The sealant skins over rapidly (approx 30 minutes) and is fully cured in approximately 24 hours depending on bead width, temperature and humidity.

Specific Data
Colour : Clear
Form : Thixotropic Paste
Specific Gravity : 0.97 at 23°C and 50% RH
Odour : Vinegar
Application Temperature : +5°C to +40°C
Colour Clear
Size 310ml
Unit Of Sale Each
Weight 0.33kg
Brand Evo-Stik
Barcode 5010591999930
EDP code 483606

You must be logged in to post a question.

No comments just yet - be the first!

There are no products matching the selection.

There are no products matching the selection.