Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Evo-Stik One Part Polysulphide Sealant 310ml White

Status : In stock

Delivery : Standard help

SKU : L021215
Inc VAT: £8.88
OR

Quick Overview

High quality ready mixed polysulphide sealant that provides excellent movement accommodation. Forms a tough, rubbery, track-free compound with adhesion and colour retention, and is also resistant to oil and may be painted over if required.

For assistance, please call:

020 8362 8100

Drag image to spin
360 Evo-Stik One Part Polysulphide Sealant 310ml White
Evo-Stik Trade One Part Polysulphide is a high quality ready mixed polysulphide sealant, which has good movement accommodation. It cures by reaction with atmospheric moisture, forming a tough, rubbery, tack-free compound with excellent adhesion and colour retention. Evo-Stik Trade One Part Polysulphide has the added benefit, over silicone sealants, in that it has good resistance to oil and can also be over-painted.

Key Features
  • All Weather Application
  • Good resistance to oil
  • Bonds to most building materials
  • Permanently Flexible
  • Lasts Up To 25 Years

Preparation
All surfaces must be firm, clean, dry, sound and free from dust, oil, grease, bitumen and other contaminants that may impair adhesion. Loose surface material should be removed by brushing, to leave a sound surface. In order to provide a firm base on which to extrude the sealant and also to ensure adequate depth of sealant in maintained, moving joints should be backed with polyethylene foam backing strip.

Application
Unscrew the nozzle, and using a sharp knife, cut off the dome of the cartridge, taking care not to damage the thread. Screw the nozzle on to the cartridge. Cut off the tapered end of the nozzle at a 45° angle, to a width matching the gap to be sealed. Fit the cartridge into the cartridge gun by pressing the release plate and pulling out the plunger. Insert cartridge and repeatedly squeeze the trigger until the sealant appears. Place the nozzle at the start of the joint, and gently squeeze the trigger. Push forward slowly, ensuring that contact is made by the sealant with both sides of the joint. At the end of the run, release the trigger and press the plunger release plate of the gun. Smooth the sealant with a round ended tool dipped in soapy water (do not use a wetted finger).

Specific Data
Colour : White
Form : Soft Paste
Specific Gravity : 1.1 at 23°C and 50% RH
Application Temperature : +5°C to +40°C
Surface Temperature : -20°C to +90°C
Weight 0.54kg
Unit Of Sale Each
Colour White
Size 310ml
Barcode 5000403104676
EDP code 70288
Brand Evo-Stik

You must be logged in to post a question.

No comments just yet - be the first!

There are no products matching the selection.

There are no products matching the selection.

Post your comment

Builder Depot